GT Motoring

Looking for local customer to do HKS Hypermax IV GT Review

Hey all!

looking for someone local interested in trying out these HKS coilovers. Our car is out of commission currently so we are looking for someone to give some feedback to us, let us take the care for short spin around the block etc so we can give customers honest feedback.

Basically giving someone a super deal on the coilovers in trade for them installing, or me installing and myself and customer giving some feedback/review.

Please PM or email me for details and pricing.






HKS - HIPERMAX IV GT COILOVERS
$1980 MSRP, $1795 normal price

Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. A special PNE coating surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. A newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles) 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit.



Kit information:

Spring ratekgf/mm) Front: ( 8K ) Rear: ( 7K )
Free height (mm) 200 200
Spring type Straight Straight
Recommended range to change spring rate Front: ±( 2K ) Rear: ±20 ( 2K )

Specification of damper

Includes extension knob for drivers side rear damper!
Upper mount kit included, aluminum with rubber bushing mount.
Damping force (Rebound/Damping)N* Front: 1496 / 280 Rear: 853 / 260
30 clicks adjustment
Remaining damper stroke (Rebound/Damping)mm 48 / 52 55 / 60
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data


Photos of S2000 Kit taken here:

Mocky

Come pick up my car and it's yours. Just give it back to me by April.

GT Motoring

OR just come for the day, can install, and then you drive back

TrkStar

I do it.

emissionsux

You can use my car if you want.

GT Motoring

Basically giving someone a super deal on the coilovers in trade for them installing, or me installing and myself and customer giving some feedback/review.

GT Motoring

Offer still may be open guys. Previous person that committed may be backing out :/

scottdh20

wish I had the money...I might even be doing one last track day this year

Chonda

Say if I was interested what do I have to pay out of pocket?

GT Motoring

Heavily discounted cost of the coilovers, almost 50% off retail! ( install done here you pay for, or can DIY ) your call.