single cam valve adjustment is pretty easy. just make sure you get there early enough for the car to completely cool down. any heat in the motor will throw off specs. anyone have a cheap box fan to bring?

 

Speaking of cooling down, how long would it take for the differential fluid to cool down so I could drain it?

 

My list for what I'll be bringing on Saturday is as follows:

Cooler with beer and prolly some soda
Some random food for grilling up (mini-baconwrapped steaks/burgers/hot dogs)
My grilling utensils and seasonings
4 Fold Out Bag Chairs
Fold Out 10ftx10ft Canopy
2 Jack Stands

I know this is a pretty random list, but anything else I can think of I'll edit this post to add it. I've got a low-profile jack as well, but I'll have no way of getting it into the car with the rest of the stuff.

 

you normally dont have to. unless you just came off a race track or high speed highway run, it shouldn't be too hot. it's actually recommended for the oil to be warm when you drain so it'll come out easier.

 

If my car is running I will follow Harry assuming he is still going to drive out, if not I will just jump in the car with him assuming he doesn't mind riding as the passenger in his own car

If he is not able to make it and I am up and running I will PM you for directions.

 

somehow I got pulled off the Saturday list. Unless I added myself incorrectly?

 

I got pulled off too, but who care.....lol

 

Updated list for a couple guys who got knocked off the list:

Saturday, March 31:
Work to be done (Simple):
z_speed- saner bar install, tranny/dif fluid, possible passenger door install depending on the weather
nicholastjs - change brake and clutch fluid (if anyone know how to do it), swap headlight with patinum, help out and learn
K1ngfunK - Front brake pad swap, rattle can hubs and axle nuts, and plastidip lip + install
javier_acosta70-Engine, trans, diff fluid, possibly brake pads
Abnormal S2k - oil change, diff fluid..possibly lip install if i get my bumper in time...
F22C+K23A - Engine Oil, Trans & Diff Fluid, Rear Brake Pads change
Danwolski - Diff fluid, maybe trans and brake pads.
The Cleaner - oil change, help out and detail
Stauren1203 (tent)- Rear tray pieces install, valve adjustment if possible

Work to be done (More Involved):
drkphnx- Oil change, transmission fluid, diff fluid, brake pads, motor mount.
patinum - remove softtop and/or help Kai install it in his car. Proceed with gutting that bitch (my car, not Kai)
Bradyy91 - Trans fluid, diff fluid, brake pads. Valve adjustment from James, Relocate bumper tab by Jesus. Silver radio door from Pat.
klui_188 - All fluids, top change. I have gear oil and will bring to share.
roc_sky - Front &rear tow hooks, header, test pipe, exhaust, and an intake.


Attending:
James0933 +1- nada...bringing detailing stuff, can help with valve adjustments
ChrisM623 - Standing around
Timbagoo - Bring beer, stand around, get in the way, spill beer, use Austin's toilet...
2PointSlow - Drink Alex's beer, sit, sleep...
tako - watch and learn
Casper 40 - watch and learn
mafia69 - watch and learn. possibly take off windshield tape? (tentative)
Jeggy - Married with children - drink drink and more drink
imnida - probably going to bring the bike if weather is good/spectate/bs (if not forced to work)
Rice069 - Watch and learn
Yosh - hang out


Sunday, April 1:

Work to Be done (Simple):
K1ngfunK - Front brake pad swap, rattle can hubs and axle nuts, and plastidip lip + install
Abnormal S2k - oil change, diff fluid..possibly lip install if i get my bumper in time...
roflitzjinno - oil change, tranny fluid change, diff fluid change, anything else I can help with


Work to be done (more involved):
Deathscythe - Eye candy, rolling fenders and gang bang


Attending:
drkphnx- Help, spectate and shenanigans
nicholastjs (tent) - mostly to help out and learn
ChrisM623 - Standing around
Jeggy - Hungover - re hydrate and continue drinking.
imnida - probably going to bring the bike if weather is good/spectate/bs (if not forced to work)
The Cleaner - watching pastidip then thinking of doing it for rims
Rice069 - watch and learn

 

Look for a PM tonight when I get back from dinner.

 

Hey guys, Alex here, I met some of you at the Naperville meet this past saturday. I'd love to come to the tech day; what time would be best? I can do any time saturday or sunday until like 3. I would like to change oil and transmission fluid; I was also talking to Austin about a suspension camber issue that might take a bit more time to investigate. Let me know what works! Thanks