Mark this thread as Unsold
2 Sets of Advan RSII's, 1 Set of Penske 8300's, And 1 OS Giken 1.5 Way Diff
04-26-2017, 04:42 PM
#1
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2 Sets of Advan RSII's PRICE DROP
STR S2000 Part out. All of the following parts have one full season of use:
2 set of Advan RSII's in black 18 x 9 et 63. Set One is perfect and comes with Advan Center Caps and 200 plus run Bridgestone RE71R's in 255/35/18. I am happy to remove the tires if buyer doesn't want them. The other set (Set 2) is an 8 out of 10. No curb rash but a couple nicks here and there. No center caps on set 2. Each wheel weighs a tick under 18 lbs. See pics below. Please take into account that I didn't wash the wheels before I took pics....too busy
Set 1 $1,800 (buyer pays shipping) PRICE DROP TO $1,500
Set 2 $1,600 (buyer pays shipping) PRICE DROP TO $1,400
1 OS Giken 1.5 Way Diff with the STR S2000 Tune. I purchased this from OS in March 2016. I used a dealer local to OS and had them source me a used pumpkin. They found one, made sure it was a solid unit, did new bearings etc and installed OS Diff into it. I paid around $3,100 all in for this. I'm happy to discuss diff and send pics to anyone who is seriously interested. PM me for more info.
$1,300 for OS Diff (buyer pays shipping) SOLD
1 Set of Penske 8300 Double Adjustable Dampers with Remote Reservoirs. These were custom built by Jeff Hurst/Angelo Zarra at ANZE Suspension. They will come with 800/750 springs, tender springs and front and rear top hats. A ton of development went into these shocks. Dyno Graphs and Build Sheets will come with the package. I'm into these dampers for $6500+ I'm happy to discuss the shocks and send pics to anyone who is seriously interested. PM me for more info.
$3,400 for Penskes (buyer pays shipping) SOLD
2 set of Advan RSII's in black 18 x 9 et 63. Set One is perfect and comes with Advan Center Caps and 200 plus run Bridgestone RE71R's in 255/35/18. I am happy to remove the tires if buyer doesn't want them. The other set (Set 2) is an 8 out of 10. No curb rash but a couple nicks here and there. No center caps on set 2. Each wheel weighs a tick under 18 lbs. See pics below. Please take into account that I didn't wash the wheels before I took pics....too busy
Set 1 $1,800 (buyer pays shipping) PRICE DROP TO $1,500
Set 2 $1,600 (buyer pays shipping) PRICE DROP TO $1,400
1 OS Giken 1.5 Way Diff with the STR S2000 Tune. I purchased this from OS in March 2016. I used a dealer local to OS and had them source me a used pumpkin. They found one, made sure it was a solid unit, did new bearings etc and installed OS Diff into it. I paid around $3,100 all in for this. I'm happy to discuss diff and send pics to anyone who is seriously interested. PM me for more info.
$1,300 for OS Diff (buyer pays shipping) SOLD
1 Set of Penske 8300 Double Adjustable Dampers with Remote Reservoirs. These were custom built by Jeff Hurst/Angelo Zarra at ANZE Suspension. They will come with 800/750 springs, tender springs and front and rear top hats. A ton of development went into these shocks. Dyno Graphs and Build Sheets will come with the package. I'm into these dampers for $6500+ I'm happy to discuss the shocks and send pics to anyone who is seriously interested. PM me for more info.
$3,400 for Penskes (buyer pays shipping) SOLD
Last edited by closer98; 05-04-2017 at 04:55 PM.
04-27-2017, 02:01 AM
#5
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
The OS diff is certainly stronger than the stock torsen. With regards to forced induction I guess it would depend on how much power we were talking about. I had a 600 RWHP miata years ago and it had a cryo treated OS Diff in it. And the car was able to put down the power like a champ. This diff is currently setup more so for autocross/track application. One could pull it out and have it retuned for any application as its fully adjustable.
04-27-2017, 08:10 AM
#6
Registered User
Join Date: Apr 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I am a new member so I can't pm you. Can you email me at connor@bloum.com very interested in the shocks
Thanks
Connor
Thanks
Connor
Trending Topics
05-10-2017, 04:22 PM
#10
Site Moderator
