Mark this thread as Unsold
PA - FS: Desmond Regamaster Evo (NSX Spec) White
#1
PA - FS: Desmond Regamaster Evo (NSX Spec) White
FS: (NO TRADES)
Thread Title: "PA - FS: Desmond Regamaster Evo (NSX Spec) White"
First Name: Dave
Price: (OBO): $2,750
Location: Newtown, PA
Contact: Email: dave@canibeat.com (or PM)
NOTE: I am currently trying to sell the wheels locally WITH TIRES. I am willing to drive and meet half way in the NJ/PA/NY/CT/DE area.
USED White Desmond Regamaster Evo's (NSX Spec)
(2) 17x8 + 35 5x114.3 w/ 215/40/17
(2) 17x9 +38 5x114.3 w/ 245/40/17
Tires are Yokohama Advan AD08R's.
I purchased the wheels from a Honda-Tech user from Russia in April of 2015, had them shipped to the US, and then had them refinished in May of 2015 by Tom @espospowdercoating in a Pure White finish (no Metallic or Pearlescent). I would rate the condition of the wheels 9/10 only because they are not brand new/original finish, and they have a few very minimal surface scratches on the inner barrels and lug nut area (see photos). The wheels and tires probably have less than 4K miles on them since I have owned them, have never been tracked, and tires have no camber wear in rears and very minimal on fronts.
PROS:
Zero curb rash, bends, or cracks on any wheels. All spoke/lip decals have been replaced and currently intact (reproduction stickers). Valve stems replaced during refinishing with Silver Enkei valve stems (closest match to discontinued Desmond valve stems). I have saved the original Desmond and JAWA barrel stickers and had them reproduced with the same exact serial numbers. They have never been mounted and will be included in the sale.
CONS:
Not original finish or original Desmond stickers. Some small surface scratches on inner barrels and on one wheel in lug nut area (see photos). Rubber gaskets on valve stems have started to dry rot but the wheels hold air fine and show no signs of leaking.
ASKING PRICE:
I am not in a rush to sell these wheels and I am currently asking $2,750 OBO PICKED UP for the wheels,tires, and brand new barrel stickers.
If you have any questions about the wheels, would like to make an offer, or would like to see any additional photos please comment below, send me a private message, or e-mail me at dave@canibeat.com.
Wheel #1
Wheel #1 Close Up
Wheel #1 Inner Barrel - After further cleaning I was able to remove all tar from the inner barrels. See additional photos below.
Wheel #1 Made in Russia stamping
Wheel #1 Tire - 215/40/17 Yokohama Advan Neova AD08R
Wheel #1 Tire - 215/40/17 Yokohama Advan Neova AD08R
Wheel #2
Wheel #2 Close Up
Wheel #2 Close up & Enkei Valve Stem
Wheel #2 Inner Barrel
Another shot of the Made in Russia Stamping
Wheel #3
Wheel #3 Close Up
Wheel #3 and other wheels
Wheel #3 Inner Barrel
Wheel #3 Made in Russia Stamping
Wheel # 3 Tire tread - 245/40/17 Yokohama Advan Neova AD08R
Wheel #4
Here you can see the rubber gasket on the valve stem is starting to crack/dry rot
Wheel #4 Inner Barrel
All 4 Wheels + Barrel Stickers
Original Desmond + JAWA Stickers and new Reproduction Stickers
Notice I tried to replicate the originals as close as possible by including the same serial numbers.
Additional photos of the wheels after I went over them and removed every spec of tar and clay bar'd them to remove any brake dust contaminants
Thread Title: "PA - FS: Desmond Regamaster Evo (NSX Spec) White"
First Name: Dave
Price: (OBO): $2,750
Location: Newtown, PA
Contact: Email: dave@canibeat.com (or PM)
NOTE: I am currently trying to sell the wheels locally WITH TIRES. I am willing to drive and meet half way in the NJ/PA/NY/CT/DE area.
USED White Desmond Regamaster Evo's (NSX Spec)
(2) 17x8 + 35 5x114.3 w/ 215/40/17
(2) 17x9 +38 5x114.3 w/ 245/40/17
Tires are Yokohama Advan AD08R's.
I purchased the wheels from a Honda-Tech user from Russia in April of 2015, had them shipped to the US, and then had them refinished in May of 2015 by Tom @espospowdercoating in a Pure White finish (no Metallic or Pearlescent). I would rate the condition of the wheels 9/10 only because they are not brand new/original finish, and they have a few very minimal surface scratches on the inner barrels and lug nut area (see photos). The wheels and tires probably have less than 4K miles on them since I have owned them, have never been tracked, and tires have no camber wear in rears and very minimal on fronts.
PROS:
Zero curb rash, bends, or cracks on any wheels. All spoke/lip decals have been replaced and currently intact (reproduction stickers). Valve stems replaced during refinishing with Silver Enkei valve stems (closest match to discontinued Desmond valve stems). I have saved the original Desmond and JAWA barrel stickers and had them reproduced with the same exact serial numbers. They have never been mounted and will be included in the sale.
CONS:
Not original finish or original Desmond stickers. Some small surface scratches on inner barrels and on one wheel in lug nut area (see photos). Rubber gaskets on valve stems have started to dry rot but the wheels hold air fine and show no signs of leaking.
ASKING PRICE:
I am not in a rush to sell these wheels and I am currently asking $2,750 OBO PICKED UP for the wheels,tires, and brand new barrel stickers.
If you have any questions about the wheels, would like to make an offer, or would like to see any additional photos please comment below, send me a private message, or e-mail me at dave@canibeat.com.
Wheel #1
Wheel #1 Close Up
Wheel #1 Inner Barrel - After further cleaning I was able to remove all tar from the inner barrels. See additional photos below.
Wheel #1 Made in Russia stamping
Wheel #1 Tire - 215/40/17 Yokohama Advan Neova AD08R
Wheel #1 Tire - 215/40/17 Yokohama Advan Neova AD08R
Wheel #2
Wheel #2 Close Up
Wheel #2 Close up & Enkei Valve Stem
Wheel #2 Inner Barrel
Another shot of the Made in Russia Stamping
Wheel #3
Wheel #3 Close Up
Wheel #3 and other wheels
Wheel #3 Inner Barrel
Wheel #3 Made in Russia Stamping
Wheel # 3 Tire tread - 245/40/17 Yokohama Advan Neova AD08R
Wheel #4
Here you can see the rubber gasket on the valve stem is starting to crack/dry rot
Wheel #4 Inner Barrel
All 4 Wheels + Barrel Stickers
Original Desmond + JAWA Stickers and new Reproduction Stickers
Notice I tried to replicate the originals as close as possible by including the same serial numbers.
Additional photos of the wheels after I went over them and removed every spec of tar and clay bar'd them to remove any brake dust contaminants
Last edited by dt07si; 09-11-2017 at 05:12 AM.
#5
Hi Lou, sorry not interested in any trades. Trying to downsize at the moment.
#6
[QUOTE=dt07si;24353610]Hello, I would be willing to ship the wheels at the buyers expense, however, because I am not interested in removing the tires shipping would be pretty expensive. if you are are seriously interested please send me a private message or e-mail me at dave@canibeat.com
I do apologize, it seems that my account here is restricted and I cannot PM you. I am very serious about purchasing wheels, is there any way I could get a quote for shipping to Cibolo Tx. 78108?
I do apologize, it seems that my account here is restricted and I cannot PM you. I am very serious about purchasing wheels, is there any way I could get a quote for shipping to Cibolo Tx. 78108?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
skafia
Wheels and Tires
0
06-30-2014 10:41 AM
ap1_s2k12
Oklahoma Classifieds
3
05-27-2012 07:27 AM
Roflcopter
Member S2000 Classifieds and For Sale
16
02-21-2011 06:03 AM