Just want to run this setup with you pros here before I pull the trigger and order them. The rim sizes are-

17x9 +43 front
18x10 +54 rear

From the tire diameter calculator, I could put my new spare stock rear tires on the front
and order some 285/30/18 for the rear and come out just like stock.
What do you guys think of fitment? I'm a little worried about the front. The rear seems doable since I'm at about -2.5 neg camber. Of course I'm ready to roll the fenders and relocate the rear bumper bolt. Any suggestions would be greatly appreciated. TIA

 

hmm I dont think its doable without looking like gargabe bro.

id do a 225 on the front and a 255 on the rear.

 

thanks Spit. Just want to use the two new tires I already have. I'll just testfit the rims first before I order any tires to see how it sits. Love your new setup btw.

 

i think you could pull it off...

eternalLx put 17x9 +50 with 255 all around:



I believe he is, or will be running camber all around and with a fender roll in front you potentially could be fine with minor rubbing..

check out his thread:

https://www.s2ki.com/forums/index.ph...ic=581615&st=0

 

You will have to do some modification to make the wheels and tires fit. Front and rear is going tro be tight. I would think fender well modification would be needed.

 

you need a slight flare in the front, check the link in my sig for pics of 17x9+40 with proper size rubber for an idea how it looks and how much you need to flare.

 

Just placed the order on the wheels and should be in a UPS truck or on the road now. Thanks for the tips and keep them coming as I would like to pull of my original plan and not wuss out and be forced to go stretched. Thanks