64.1mm bore on front?

Reply Subscribe

Thread Tools

Mar 2, 2010 | 04:18 PM

wheatie

Thread Starter

Registered User

Joined: Nov 2009

Posts: 34

Likes: 0

64.1mm bore on front?

is it possible to put a wheel with a 64.1mm bore on the front? if so what needs to be done to make it work?

Mar 2, 2010 | 10:04 PM

wheatie

Thread Starter

Registered User

Joined: Nov 2009

Posts: 34

Likes: 0

looks like im going to have to bore out the center after googling alot. anybody a machinist that could give me a general price im looking at for having 2 wheels done?

Mar 3, 2010 | 04:30 AM

1nate7

Joined: Feb 2005

Posts: 4,273

Likes: 29

From: Tucson

Your only other option is to run a 3-5mm spacer to cover the hub.

Mar 3, 2010 | 08:17 AM

viets2000

Registered User

Joined: Feb 2009

Posts: 338

Likes: 4

From: Wichita, KS

Yeah, a 3mm spacer should let the wheel clear the hub bore

Mar 3, 2010 | 08:45 AM

patinum

Joined: Nov 2004

Posts: 5,572

Likes: 18

From: Second City

Would extended wheel studs be necessary?

Mar 3, 2010 | 12:36 PM

viets2000

Registered User

Joined: Feb 2009

Posts: 338

Likes: 4

From: Wichita, KS

Nah, you'll be fine with the factory length wheel studs

Mar 3, 2010 | 12:54 PM

Jim@tirerack

Former Sponsor

Joined: Jul 2001

Posts: 7,319

Likes: 7

From: South Bend

I don't think so. You are not going to have the same number of turns. The seat on the wheels may be different as well. You might also have a different length that would be needed for the wheel.

64.1mm bore on front?

64.1mm bore on front?

Trending Topics