Hi guys!

I have just buyed a Brembo GranTurismo BBK..13" rotors with black calipers..

I have now installed on my AP1 a set of WORK emotion CR kai 17" x7 front +47 and 17"x8 rear +47..but the guy that sell me the BBK says me that in the front i must have + 43 Offset for install the brembo..or two 5mm spacers..
My question is :
i decide to change the wheels cause i don't like spacers and i WTB some ce28N for my car

What are the right ET for Brembo BBK and for rear????I would install 215/45 front and 245/40 resr tires so i think 17x7.5 and 17 x8.5 is right...but the best ET???

Thanks anticipately..and sorry my bad english!!!

 

You can not go off just the offset to check brake clearance. The shape of the spokes also come into play. You would need a drawing of the wheel and the brakes to make sure. We now which wheels we carry work with the BBK but we do not carry the Work wheels.

 

thank you ..but i would know if i buy a set of CE28 with 43 offset for front and 50 for rear i can fit the Brembo BBK 13" without problem

 

1775 +43 would get you pretty darn close.

 

damn close.....or most likely a 3mm spacer

 

Ok and thanks..

But if i would fit with my current work emotions wheels??? ..there have Offset of 47..