Am i able to run these rims
17x9 +47 front
17x10 +47 rear

and what would i need to do to have these rims on the car?
please let me know.

I have already ordered the ASM rear over fenders and will cut my rear quarter panel. But if there is another way please let me know

Thank you all in advance.

Desmond

 

Gangster set up

Yes there do able. just run a 255/225 set up. Make sure you roll the fronts too and throw some - camber front and rear

 

thank u for the informations... but 255/225?

that was a typo right?

 

 

225 front
255 rear

 

225 front? i can do so on a 9inch rim??

stretched?

 

yea. you're going to need to run stretched tires to clear that up front.

 

gotcha...thank you...

Do I have to pull my front fenders or anything like that ?

And while I wait for the rear over fenders...would I be able to fit the rears on without any major issue?

please let me knoe

thank you

Desmond

 

just bend the tabs up in the front and you should be good, as for the rear just a fender roll and it will work

 

that will work fine. I am running 225 on my front 9 inch wheel. the rear will work without flares but you have to roll the fenders and run about 2.7-3 degree camber with 255 tires