Spoon wheel fitment
Thread Starter
Registered User
Joined: Jun 2002
Posts: 97
Likes: 0
From: Orlando
Spoon wheel fitment
Hi all.
I recently ordered a set of Spoon wheels with the +35 offset for the front. I have heard contrasting opinions about rubbing. Some say that they are fine with less than an inch drop. Some have said that they will rub no matter what. I am lowered about .75 on Tein RA's, and am wondering if this should be a concern. I have at least one finger gap in the front. I know there is a +45 available, but this comes with a long wait. My camber in the front is -1.5. I do not track the car, but as with everyone else, do drive aggressively. What are your experiences?
Thank you,
Charles
I recently ordered a set of Spoon wheels with the +35 offset for the front. I have heard contrasting opinions about rubbing. Some say that they are fine with less than an inch drop. Some have said that they will rub no matter what. I am lowered about .75 on Tein RA's, and am wondering if this should be a concern. I have at least one finger gap in the front. I know there is a +45 available, but this comes with a long wait. My camber in the front is -1.5. I do not track the car, but as with everyone else, do drive aggressively. What are your experiences?
Thank you,
Charles
Thread
Thread Starter
Forum
Replies
Last Post
ASMspec
Wheels and Tires
17
Jan 12, 2006 05:46 PM