wuts up guys, just curious if anybody running these wheels.. im lookin at the tork imagine 19x8 n 19x9 for my2k.... im running the Konig Imagines blk 18... but i wanna go stagg and im tired of cleaning, so 5 star will do... pics will help alot doesnt matter blk or hyper i just wanna see how they look on a S2000

 

i've been looking at these now too.... anyone have any pics of them on an S?

 

 

The offsets on that wheel dont fit a S2K.

Find the application guilde for wheels you like, check the availble offsets, and use the offset cal. posted in this thread.

 

i was told that the offsets would fit though... did you already look at the app guide for these rims? and if so, where did you find it??

and dont roll ur eyes at me, not everyone has experience in this shit, if its a thread with a topic u tihnk is going to annoy you, move on to the next thread!

 

DUDE......didnt think i would find this BUT I my friends HAVE the tork imagines........i just got them last week with Hankook tires......

let me tell ya......THEY LOOK SICK.

They are the 18 X 8 up front and 18 X 9 in the rear with the Deep dish look.

My car handles pretty good with them on. Maybe not as good as my 17's but they sure look good! and i dont do all the auto crossing and cornering like some of the folks around here do.

I'll try to get pics this saturday after i wash the car and stuff...

BUT I HAVE ONE ISSUE......if yall can help me with this.....I lowered my car with the tiens. 1 inch drop. i'm on STOCK shocks and if i hit a good size bump or dip, the tires rub. does anyone know if putting better shocks would help? or how to roll out the fenders or something?

THANKS!!!!!

 

they rub because the offsets are wrong. changing the shocks probably won't help. negative camber may. rolling fenders likely will.

 

dang........so how do i do it? i heard you heat up the fenders and use a baseball bat?? i'm not sure what i'm rolling here....

Is there a better way?

 

I AM SOOOO DEAD WRONG... I THOUGHT i was hearing tires rubbing on the fenders.. ITS NOT

I had altered my exhaust by taking the resonator out of the stock exhaust to weld in a straight pipe... i had taken out the exhaust system but couldnt get the hangers off of the rubbers and cut them. Well when i put the exhaust back in, i zip tied them and FORGOT that they were tip tied and didnt get a chance to get another rubber hanger.

the zip ties on the right side of the exhaust broke and when i was hitting bumps, it was banging against the metal bar that goes accross under neith the car. I fixed the problem and NO MORE SOUND!!!!!

So even though my car IS lowered 1 inch, its still able to take those rims without rubbing on the fenders.

Wheelsmax is where i got mine and said they do have the correct offset and i called another company that slips my mind right now and he said the same. *shrugs*. ionno... But i went through ALL the places i normally went when i heard those noises and NOTHING. I"M HAPPY! no rolling fenders.. AND this is with my girl with me for added weight

 

^^^
Do you mind posting the offset of the rims and brand and size of your tires?

Jim