WedsSport SA-10R Blc
Thread Starter
Joined: Sep 2009
Posts: 97
Likes: 0
From: Long Island, New York
WedsSport SA-10R Blc
These come with a 45mm offset . Will this cause any rubbin gissues with rolled fenders or a slight camber. If camber how much.
http://www.wedswheelsna.com/weds/wedssport/sa-10r/
http://www.wedswheelsna.com/weds/wedssport/sa-10r/
Joined: Nov 2007
Posts: 13,608
Likes: 39
From: Orlando, FL
I am running WedsSports SA-15R | 18x8.5 +48 | 18x9.5 +48 | 235/40|265/35
I had to roll all around. Also relocated the rear bumper tab. Running -1.9 upfront and -2.9 in the rear.
I can get the wheels if interested! Let me know if you have any other questions. Your setup should be almost the same considering it is 3mm of difference. But if you are going to run squared 9.5 +45 the front will need more camber. Well depending on your height.
I had to roll all around. Also relocated the rear bumper tab. Running -1.9 upfront and -2.9 in the rear.
I can get the wheels if interested! Let me know if you have any other questions. Your setup should be almost the same considering it is 3mm of difference. But if you are going to run squared 9.5 +45 the front will need more camber. Well depending on your height.
Thread
Thread Starter
Forum
Replies
Last Post