I'm a new owner of an '05 S2000 and have been looking for aftermarket wheels. I want to get something that is really close to the factory offset and stagger.

So for about the only wheel I have found that is pretty close to being correct is the Volk CE28-N.

Is there a list on the site of wheels that are a good fit for the S2000?

Also I have had no luck using "search" on this BBS, just me?

Thanks in advance,

Bob

 

https://www.s2ki.com/forums/index.php?showtopic=293591

https://www.s2ki.com/forums/index.php?showtopic=260491

Also our very own sponsor for this forum www.Tirerack.com
check with those 3 above sponsor for our site for great fitting staggered wheels......

 

Sweet! Those are most of the wheels I have been looking at. Seems like the S2k has a wheel offset / stagger setup that is not real common.

I think I'm leaning towards the CE28N in bronze. I am new to this forum but have heard of someone on the board that people have purchased their wheels from.

Anybody with a good contact for Volk wheels? I would like to get a wheel / tire combo deal if possible.

Thanks in advance,
Bob

 

^^^^ for a good contact on volk wheels that would be Steve at Evolution which is the 2nd link that I gave you and the number you can reach him is 703-961-9090........

 

Thanks 04RioS2k!

Like I said I'm a newbie here and spazzed. After I looked at the links it was like . . . DER!

Anyway thanks for the info, I'm waiting for my exhaust to arrive (Amuse R1) and have started my search for wheels and tires.

My last ride was an '03 Evo VIII which also had a limited amount of wheels available due to the Brembo brakes. On that one I ended up running Advan RG's.

I was thinking bronze CE28N's but those titanium TE-37's look sweet too!

Thanks again for the info,
Bob

 

96 LXR,

I have one set left on the CE28N Bronze 17X7.5/17X9 coming in June 7th. Currently from my knowledge, all bronze CE28N 17 inch are sold out until another 3 month except for this one.
Give me a call if you have any questions.

Steve - Evolution
703-961-9090

 

Thanks Steve,

Sent you a PM with some questions . . .