Smokey Donuts

Hello all,

I apologize in advance if this has been answered 8,000 times already but I have been researching and trying to figure it out. Let me start by saying I'm using this awful IB AutoGroup app that constantly freezes so my searching on the go is very limited.

I just purchased a set of BBS LM's 17x8/9 +45/42 and I will be running 215/45 245/40 Dunlop DZ102

I have read multiple threads of mixed answers of "it will fit with camber" and "you will need a roll and tab relo"

Correct me if I'm wrong about MY04 stock spec ap2v1 wheels
17x7.5 +50
17x8.5 +63

Going by the spec of the new wheels I should be going more aggressive in he front ~18mm and in the rear ~33mm

I am lowered on coils and my car is corner balanced to the current set up. I'm not completely dumped, but it is still low.

All of your help / criticism is appreciated

Smokey Donuts

After more research I've decided I'm just going to say F it and roll my fenders to be safe. Wish me luck!

1nate7

Good call, it really needs to be done since you are lowered. Stock specs are actually 7" +55 and 8.5" +65, so it's an additional 23mm front/29mm rear poke. Nice wheels, should look good when done.

Manga_Spawn

They definitely need a fender roll.