today i checked this few times and at WOT my Scangauge shows TPS of 76%.

is this normal?

isn't this supposed to be 100%?

i checked accelerator pedal and it's movement is free and unrestricted.
i opened DBW and it also looks OK.

 

Your Scangauge manual will tell you that some cars don't report values all the way from 0 to 100. Nothing to worry about, you're still getting full throttle.

 

right......
so i guess this will be hte same for any OBDii scanner that i will connect, right?

 

btw - i see that at hard throttle press the ECU goes to the Open Loop - so it definitely recognises WOT.