chilicoke: side diffusers
#1
Registered User
Thread Starter
chilicoke: side diffusers
i was pm'ing chilicoke about four months ago to see if/when he'd put those infamous side diffusers he custom made for his s2000 up for sale and i was just so happening to be just inquisitively dropping by his site and there they were, ready for distribution. i immediately pm'd him and setup a paypal transaction. he shipped them out on monday and i received them on friday (california to florida).
so, here it was, straight out of the box, no damage of course, beautiful...
here is the mounting hardware, self-tapping screws and fender washers, also included was incredibly detailed instructions with pictures (even the novice could install these)...
so, here it was, straight out of the box, no damage of course, beautiful...
here is the mounting hardware, self-tapping screws and fender washers, also included was incredibly detailed instructions with pictures (even the novice could install these)...
#3
Registered User
Thread Starter
now to the install, basically all i had to do was jack up the front, put a jackstand there, lower it down, and then use the jack to hold up the rear. hold up the side diffuser, use a paintpen to mark the holes for drilling (7/64" drill bit), drill it out, temp install all the screws, and then tighten them down.
Trending Topics
#10
Registered User
Thread Starter
they are black gel coat (fiberglass reinforcement) with a matte black paint job. clearance is decently tight, so i don't think the side strakes will fit.