F24 stroker build
#1
F24 stroker build
Well it has progressed partially out of the planning stages. the tentative build is listed below ill update pictures as the build progresses and we will see how this motor holds together. ill be using an AEM ems tuned on e85 by Tony at UMS.
AEBS sleeved f20c block
k24a2 crankshaft
k24 main/rod bearing
Inline pro f24 stroker rods
JE 87mm pistons (compression to be determined still)
assuming funds permit the valvetrain will be freshened also with new valves and dual springs / titanium retainers.
Im hoping to have the build completed by the end of summer.
Block
Bling
Breathing
noise
unfortunately not fast forward but also 1/5th of the price (ordered in the next few days)
13:1
power(these are a maybe as of today)
AEBS sleeved f20c block
k24a2 crankshaft
k24 main/rod bearing
Inline pro f24 stroker rods
JE 87mm pistons (compression to be determined still)
assuming funds permit the valvetrain will be freshened also with new valves and dual springs / titanium retainers.
Im hoping to have the build completed by the end of summer.
Block
Bling
Breathing
noise
unfortunately not fast forward but also 1/5th of the price (ordered in the next few days)
13:1
power(these are a maybe as of today)
#3
Moderator
Trending Topics
#9
its no more work than rebuilding it to stock at this point and has more potential than stock. had i not spun a bearing i would not do anything to it, the car was alot of fun to drive just stock.