Hey i recently screwed my motor up so i think its time to build it. Im going to be running Supertech vavles vavle guides springs and retainers BC stage 2 turbo cams low compression pistons and sleeve the block. I was wondering where i could get all this done at. What shops are local that will do a good job and not charge outragous prices.

 

PM'd you

 

pms replied

 

Do you have any spare parts? I'm always keeping an eye out for spare blocks and heads

 

no spare parts yet right now just gathering the parts i need

 

I don't think any aftermarket CAMS have helped any F/I guys?

 

It wasn't the cams specifically but more the cam degree. I remembering seeing some where they looked like little wedges. Stick with stock cams or BC stage 2 regular cams.

 

if you look at the thread in the F/I section i think its called are tubo cams worth it it has the dyno results of the cams and there were some pretty good gains





https://www.s2ki.com/s2000/topic/896...s/page__st__25