Carefully lay up and cut expensive CF. Correctly mix the poly resin. Spread several layers out evenly. Trim off excess. Sand if needed and reaply a small amount of resin and poof, your done. Just that easy.

 

Dammit Jeff, quit making cool stuff!

 

You ain't seen nothin yet!

 

I'm going to do the vented hood mod probably this weekend (driver's side 3 holes), and when Fuji comes out with their ITB's, I'm going to need a custom air scoop from the back 2 holes to channel fresh air to the throttle bodies, w/o allowing water to enter. I will be contacting you for your services at that time, if you feel up for the challenge

 

Already working on a hood with the three vents on the pass side.

Time is my only enemy. With a real job and my own business it is hard to break away enough time to do other projects.

 

The important part of the setup will be the actual scoop from the vents to the throttle bodies. If I make a mold, can I send it to you to have you form the carbon fiber to the inside of it? I'll do all the designing and molding, then cutting the holes for the velocity stacks...all I'll need is the carbon fiber "shell"

...it'll be a little while anyway...fuji's ITB's aren't supposed to come out till around november anyway...