View Poll Results: What do you think of this project?
Voters: 1. You may not vote on this poll
Future S2K owner
06-12-2016, 06:17 PM
#1
Registered User
Thread Starter
Join Date: Jun 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Future S2K owner
So I'm looking towards an S2K as my next car. I'll be saving up for it for roughly 2 years, as I plan to immediately start modding it.
I found an Indy Yellow 01 with 119k on the odo. Almost new tires and well kept
It's 11k and I think I'm going a bit overboard with parts. Dont care, love some more power
Anyway, I think I'll be fitting a Full Race Prostreet kit, specced with a purple BOV and Wastegate. It's running a Garett GT3582R, with a handmade manifold.
After that is an Invidia N1 single pipe catback, and a DC Sports CAI. There are also stage 2 Brian Crower FI cams with new valves (+1mm on both I and E) and valve springs. There's a Spec Clutch Stage 3+ system with new braided lines, and and Willwood brakes. I'll also be fitting a carbon hood and trunk, with new auto hood dampers and a few strut braces for the engine bay. Along with that I'll be using a J's Racing blue rocker cover and shift knob. My wastegate and bov are both purple, along with a new oil filter. I'll also be installing a new fuel pump, injectors and steering wheel. There will also be new KSPORT coilovers and a new Haltech ECU (along with a laptop to do diagnostics).
That's about everything I plan to do, with weight reduction and new seats after. Maybe a new pump to run E85.
Anyway, what do you guys think? If all goes well I'll have regular updates and pics as time goes by.
I found an Indy Yellow 01 with 119k on the odo. Almost new tires and well kept
It's 11k and I think I'm going a bit overboard with parts. Dont care, love some more power
Anyway, I think I'll be fitting a Full Race Prostreet kit, specced with a purple BOV and Wastegate. It's running a Garett GT3582R, with a handmade manifold.
After that is an Invidia N1 single pipe catback, and a DC Sports CAI. There are also stage 2 Brian Crower FI cams with new valves (+1mm on both I and E) and valve springs. There's a Spec Clutch Stage 3+ system with new braided lines, and and Willwood brakes. I'll also be fitting a carbon hood and trunk, with new auto hood dampers and a few strut braces for the engine bay. Along with that I'll be using a J's Racing blue rocker cover and shift knob. My wastegate and bov are both purple, along with a new oil filter. I'll also be installing a new fuel pump, injectors and steering wheel. There will also be new KSPORT coilovers and a new Haltech ECU (along with a laptop to do diagnostics).
That's about everything I plan to do, with weight reduction and new seats after. Maybe a new pump to run E85.
Anyway, what do you guys think? If all goes well I'll have regular updates and pics as time goes by.
Thread
Thread Starter
Forum
Replies
Last Post