STASIS Engineering
Sanoma
California

T +1 (707) 935 9700

F +1 (408) 353 9458

 

from what I kind gather it looks as though the endless only require 5mm more than the brembo. 38mm from hat to caliper edge vs 43mm (endless)

 

I think this will work. 17x7.5 +38

It shouldnt fit any worse that my 17x7 +47s do now right?

 

You also have to figure out height issues. Not all 17s will work due to the height of these calipers. How are the spokes? If they are flat you may need a +30 or +29 wheel if they have some curvature then a mid to high +30s will work.

I am picking up another set...

 

of brakes? or wheels?

did you ever sell you cwest fenders?

This is my idea.

17x7.5 LE/CE volks in Magnesium (i love the blue) +50 w/ 15mm spacer so really +35.

17x9 in the back. since 1 inch is like 25mm 30mm is just barley more than that. which means I am adding about .5 inches to either side of the front as far as width goes. so it should have the same balance as running x8 x9.

worst case the front loses its understeer and the tail gets happy I ahve to get a sway bar to compensate.

my head hurts now.

 

I've spoken to Stasis recently and they said they do not carry, nor plan to develop, any Alcon kits for the S2000. There's a kit available in Japan, but it's 400,000Y...by the time it gets imported here, figure $4k USD.

 

[QUOTE=JSR_AP2,Oct 20 2005, 01:01 PM] I've spoken to Stasis recently and they said they do not carry, nor plan to develop, any Alcon kits for the S2000.

 

http://www.hrpworld.com/index.cfm?form_pro...&action=product


this is the east coast alcon distributor. 3250$ I am guessing it is the same kit.

 

If it's the european kit, yeah, it's the one hoerr carries. It's a race kit tho, so no dust seals on the pistons and uses the race version of the b-type caliper. Japan has an Alcon Mono4 based kit, but as I mentioned, it's 400kY. Stasis' Mono4 kits are about $2800, but so far, I haven't been able to get them to mfr their own kit for me. I've spoken to Hoerr also...good guys. I might go with them on a custom setup, but I need to do all the measuring.

 

so guess this means it costs twice as much and last 1/4 as long? damnit.