Hello everyone,

I'm trying to figure out what kind of set up produces good power. What products do you have on your car? I just want to see what people have on their AP2s that really work well. Please put up your dyno numbers, whether or not it was tuned (with before and after dyno numbers) with what system, and how much you spent on everything.

Please also note your noise level: Rate 1-5
1: stock
5: full catless no resontor 70mm noise
Mention also if you experiance drone

Thanks,
Calvin

PS: Please note what type of dyno you used.
This post should not be limited to people who replaces all of their I/H/E
Partail stockers are welcome too.

 

Actually... I've researched this before and running I/H/E isn't really a good idea because at WOT, the car runs very lean, which isn't good at all. So if you have that setup, you should really consider getting a tune before laying on the car.

But as far as Intake and full exhaust (with stock header)... you can expect somewhere around 215 to 220 whp... depending on whether you use a 63mm or 70mm. 70mm is the way to go though... great power. Right now I have the 63, but I'm going to upgrade to the 70mm.

Noise level with TP and 63 is about a 3.5 and just stupid loud at WOT. I'm very satisfied with the T1R and K&N setup... great power and AMAZING SOUND!!!! Sorry I don't have any dyno #'s for you, but I haven't gone for a tune yet, but I will be soon.

Andre

 

Hey Andre,

Thanks for the post! What tuning platform are you planning on using and where are you going to get it tuned. Just asking since i live in Northern Jersey also.

Calvin

 

No problem man. Glad I was of some help.

You'll find everything you need to know here about what I'm going to do tuning wise...

https://www.s2ki.com/forums/index.ph...T&f=9&t=405306

Andre

 

i don't have any dyno numbers, but i'd recommend j's racing for the i/h/e. you should have no problems getting 20-25 more hp with an j's racing i/h/e highflowcat/straightpipe setup.

 

I plan on getting my car tuned soon......I have J's header, Berk TP, AUT Cooling Plate with drop in filter and Apexi N1 exhaust....going to get it tuned with Greddy E-manage Ultimate...hopefully should be putting some nice number NA hopefully

 

s2k Kidd,

what is your impression from your mods. Low mid and high end? What about noise?

 

My mods on a AP2
J's Racing 70rr
Toda header
stock intake
AP1 01' ECU


video:

http://www.youtube.com/profile?user=s2kjay15

 

Does that say 215 hp or 225 hp?

Andre

 

Nice numbers!
I'm piecing together a similar setup:

I recently installed a J's 70RS on My AP2.
I have a Testpipe, '00 ECU arriving this week.
Stock header/airbox for now.