this header and exhaust are the one off custom set bought by art/pacman/1st s2 on individual's etc.

enough of the thread jacking. back on topic

 

^

Have you consider Prime Garage Cam and valve spring?

 

are those the cams on aj-r's site that are sitting on TODA boxes?

the specs look almost the same as well.

 

https://www.s2ki.com/forums/index.ph...c=207528&st=25

 

PM Dan for the info.

This is all old news.

Remember they came out in 2002 and you CAN buy them regardless of what people tell you on here. Its all about the money. I can speak with experience and so can a lot of other members. Do some more searching there were threads back in 2002 on this stuff.

 

Not sure whats been said or not..
But Spec A needs tuning, and they are good to go.
Spec B and C need the sprockets, tuning, and more valve clearance in the pistons. Also valve springs are suggested. I think you can get some major NA gains with them, but be prepared to do a lot more engine work than just cams to get there...

The cams at AJ-R I think are similar to Spec A. And CRower should be coming out with some by this summer, so they say.

 

shoot me now...what a worthless thread.....someone with experience please give some input...everyone one else i thank you for your remarks, but i know alllllll about the cams, i would just like some feedback from someone whos used them.

 

The problem is there haven't been any proven gains with cams for the S2K. J's racing, Amuse, Cwest, etc.. with exception of ASM, all doesn't use cams and they definitely did not spare $ with their project S2K's. So it might kind of point to the obvious aftermarket cams don't do much for our cars.