Spy RSX-S

I need an S2000 gauge cluster to mount in my Type S and i need the OEM valve springs out of the S2000, both exhaust and intake.

i want to add something different to the RSX and since i have the Toda Spec A cams i need a gauge with a good enough redline. also the s2000 valve springs are OEM on 2003 RSX type S and i need a set to use with the Toda kit and Unichip (Redline 9200)


let me know on prices. part can be used or new but must be in good working order.

thanks

Spy

SpyRSX006@yahoo.com

evo s2000

s2000 gauge cluster would bolt in your car? Never knew that. How much modification is required?

Spy RSX-S

it will fit, i will need to convert certain wires and relays. at this moment i dont know what mods are needed until i open the unit up. i have pre-fabircated a fiberglass bezel to hold it.

Spy

Spy RSX-S

anyone have anything?

Spy

PsychoBen

I have the Exh valve springs, if you want it.

Are you sure the S2000 Exh valve springs are good enough for Toda cams? The reason I have them available in the first place is because I had to replace them w/ OEM Intake valves spring as required by Toda cams V1

Spy RSX-S

i am no longer running Toda Spec A cams. i switch to JUN Type 3 cams. the differences in the Toda spec A cams(type S not s2000) compared to the S2000 cams are the duration. the lift is affected, but not to the point where i have ton run Toda valve springs, and since i raised the redline i need the springs.

Spy

PsychoBen

OK. In that case, how about $30 shipped for the S2000 OEM Exh valve springs? I think they are over $80 from retailers.

700+s2000

I have both ex & int valve springs pm me with a reasonable offer

Nick