Installed Tech 2 Front Mount
#1
Installed Tech 2 Front Mount
I woke up really early today and was supposed to go riding but since it was wet and cold i decided to do some long delayed work on the rides. I took off the big and ugly license plate bracket off the R6 and then went to my neighbors house to do the FMR.
Step 1. Bumper Removal. This is pretty easy, coulple screws, couple bolts, and a nice yank.
Step 2. Fitment and alignment.
Fits nice
Step 3. Drill Holes.
Step 4. Make L bracket to hold the bottom of the radiator.
Step 5. Attach hoses and mount radiator.
Step 6. Re-install Bumper.
Step 7. Stand back and admire
It took me about 1.5 hours. I also had to take some rain breaks and go in the house to warm up a little cause it was cooooooold.
Step 1. Bumper Removal. This is pretty easy, coulple screws, couple bolts, and a nice yank.
Step 2. Fitment and alignment.
Fits nice
Step 3. Drill Holes.
Step 4. Make L bracket to hold the bottom of the radiator.
Step 5. Attach hoses and mount radiator.
Step 6. Re-install Bumper.
Step 7. Stand back and admire
It took me about 1.5 hours. I also had to take some rain breaks and go in the house to warm up a little cause it was cooooooold.
Trending Topics
#9
Registered User
Join Date: Jul 2004
Location: San Diego, Wess-Side!!
Posts: 8,796
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Silver S2k4,Apr 4 2005, 08:33 AM
Nothing other than it looking amazing everytime I look at the car.
I'm sure it will cool the air better, hence improving performance but not really adding horsepower.
I'm sure it will cool the air better, hence improving performance but not really adding horsepower.
Why did you have to fabricate a bracket? I thought it came with all the hardware required.