SOLD: Silverstone 06' S2000 w/ Regamasters, 75k miles
#1
Registered User
Thread Starter
SOLD: Silverstone 06' S2000 w/ Regamasters, 75k miles
Thinking of moving onto a project and a daily. Oil and filter has been changed every 4,500 miles with Amsoil OE and Honda OEM filters. Engine has been well taken care of. Clean title under my name. Currently at 75k miles.
Brand new soft top in the car. Everything behind the seats was stripped when the roll bar was installed - I still have all the interior bits albeit with some broken plastic clips but it will be provided with the car. Herculiner was used to cover up the metal behind the seats. Roll bar installation was done at Sportscar Shop in Sterling, VA.
Mod list:
Desmond Regamaster MP - 17x9 +45 square
Fortune Auto 500 coilovers, 10k
Spoon N1 exhaust with Spoon TP and CEL fix (stock cat will be included)
Spoon valve cover
Spoon spark plug cover
Stock steering wheel (pictures show otherwise)
NRG hood dampers
CT-E intake
CT-E strut bar
CR S2000 radio door (stock door will be included)
Alloycraft coolant overflow + oil catch can
Gladman Performance engine bay covers
Cusco cooling plate
Hard Dog roll bar w/ harness bar and double diagonal
AP1 rear bumper swap
Front bumper emblem and license plate holes shaved
OEM AP2 lip
Blox shaft spacers
Centric rotors w/ EBC Greenstuff brake pads
(might be forgetting some things here and there)
The bad:
VSA (traction control) not working, light stays on the dash, but passes inspection
Front fenders have slight bacon due to roll/pull
Two tiny chips on the front windshield due to NoVA roads
$16k located in Manassas, VA.
No trades unless you have a cheapish manual Honda Fit and cash on your end, feel free to contact me about the car!
Brand new soft top in the car. Everything behind the seats was stripped when the roll bar was installed - I still have all the interior bits albeit with some broken plastic clips but it will be provided with the car. Herculiner was used to cover up the metal behind the seats. Roll bar installation was done at Sportscar Shop in Sterling, VA.
Mod list:
Desmond Regamaster MP - 17x9 +45 square
Fortune Auto 500 coilovers, 10k
Spoon N1 exhaust with Spoon TP and CEL fix (stock cat will be included)
Spoon valve cover
Spoon spark plug cover
Stock steering wheel (pictures show otherwise)
NRG hood dampers
CT-E intake
CT-E strut bar
CR S2000 radio door (stock door will be included)
Alloycraft coolant overflow + oil catch can
Gladman Performance engine bay covers
Cusco cooling plate
Hard Dog roll bar w/ harness bar and double diagonal
AP1 rear bumper swap
Front bumper emblem and license plate holes shaved
OEM AP2 lip
Blox shaft spacers
Centric rotors w/ EBC Greenstuff brake pads
(might be forgetting some things here and there)
The bad:
VSA (traction control) not working, light stays on the dash, but passes inspection
Front fenders have slight bacon due to roll/pull
Two tiny chips on the front windshield due to NoVA roads
$16k located in Manassas, VA.
No trades unless you have a cheapish manual Honda Fit and cash on your end, feel free to contact me about the car!
#4
Registered User
Thread Starter
OEM hardtop and Regas will be off within a week or so, brand new soft top will go back in the car along with some RPF1s on Hankook V12s, price will go down slightly!
Thread
Thread Starter
Forum
Replies
Last Post
TeslaChicken
Cars for Sale
10
05-04-2016 10:37 AM