hardtop installed
#1
Registered User
Thread Starter
Join Date: Dec 2010
Location: NJ
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
hardtop installed
here are the pics.
http://img51.imageshack.us/img51/4523/img0094rt.jpg
http://img714.imageshack.us/img714/8967/img0095yg.jpg
http://img204.imageshack.us/img204/3163/img0096za.jpg
but i failed sealing.. so i need to do it again...
anyone who lives arround metro who can do it well, help me!!
ill pay
http://img51.imageshack.us/img51/4523/img0094rt.jpg
http://img714.imageshack.us/img714/8967/img0095yg.jpg
http://img204.imageshack.us/img204/3163/img0096za.jpg
but i failed sealing.. so i need to do it again...
anyone who lives arround metro who can do it well, help me!!
ill pay
#4
Registered User
Thread Starter
Join Date: Dec 2010
Location: NJ
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
theres a gap between the hardtop and the rear fender side..
i think i did something wrong.. cuz.. i cant put bolts in unless someone
push down hardtop so the whole matches up..
i think i did something wrong.. cuz.. i cant put bolts in unless someone
push down hardtop so the whole matches up..
#6
Registered User
Is it the semicircle bulb type seal on the bottom? Solid side mounts?
If solid mounts, you can use a ratcheting tie down strap or screwdriver (through one of the lower bracket holes while you tighten the other one) to pull the top down into place after bolting the brackets to the top itself. The rear seal takes some pressure to compress and settles after a while.
If solid mounts, you can use a ratcheting tie down strap or screwdriver (through one of the lower bracket holes while you tighten the other one) to pull the top down into place after bolting the brackets to the top itself. The rear seal takes some pressure to compress and settles after a while.
#7
Community Organizer
rattle can your stock wheels flat black and call it DONE.