Goin FI with pfab
#313
Originally Posted by John Grant,Jan 16 2010, 10:29 AM
not bad at all only about a 5% difference between the dynos.
#314
Registered User
Join Date: Dec 2005
Location: Bay Area
Posts: 2,685
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kyle.tomita,Jan 17 2010, 12:39 AM
I was expecting a bigger difference. ive been reading about 12% on the internet and the internet is always right.
#316
Registered User
Thread Starter
Join Date: Mar 2006
Location: Portland, Oregon
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
354.7whp and 243.2ft-lb torque. I think there is still more timing left to create more power as we are still running into a little timing issue. My knock sensor might be bad also as it keeps throwing a knock sensor check engine light. I think it could also be related to the moderate amounts of vibration caused by my dp rubbing against the frame =( Fixing that problem right now. If it doesnt work, I may need to borrow someone's knock sensor to troubleshoot this issue.
#318
Originally Posted by S2Kme,Jan 21 2010, 09:50 PM
354.7whp and 243.2ft-lb torque. I think there is still more timing left to create more power as we are still running into a little timing issue. My knock sensor might be bad also as it keeps throwing a knock sensor check engine light. I think it could also be related to the moderate amounts of vibration caused by my dp rubbing against the frame =( Fixing that problem right now. If it doesnt work, I may need to borrow someone's knock sensor to troubleshoot this issue.
Jason