clutch
#21
Registered User
Join Date: Dec 2003
Location: Calgary, Alberta, Canada
Posts: 725
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 4doorj,Mar 15 2005, 11:41 AM
i have a question for you guys.... i changed my clutch...so that consisted of unplugging all my sensors.... i look underneath they all look good.... but now my check engine light is on... i got it scanned... and it says something about "secondary air flow"... do u have an idea of what that could be?
http://www.baustnet.com/honda/misc/dtc.htm
I've used that to get a few codes (one for the engine, one for the power steering computer). It works slick.
So, do you know the exact code number? Looking through my service manual, I see "Secondary Air Injection System Incorrect Flow" (code P0411). There's a three page writeup in the service manual on how to diagnose what went wrong with this system.
There are quite a few electrical pieces hidden all over the car that run this system. You really need a copy of the service manual to double check to make sure they are all plugged back in (that and to make sure you got all the vacuum lines hooked back up). There is an electronic copy of the manual that's about 29 megs floating around. If you had an online place somewhere where I could put it...
Chris.
#23
Registered User
Join Date: Dec 2003
Location: Calgary, Alberta, Canada
Posts: 725
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 4doorj,Mar 15 2005, 01:21 PM
thanks chris... me and my friend will get the code again today.... is there anyway the service manual will go through email?
Chris.
#24
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 6,309
Likes: 0
Received 0 Likes
on
0 Posts
#26
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 6,309
Likes: 0
Received 0 Likes
on
0 Posts
Chris you are the man!!!!
i got the exact code P0411 and i follewed the table... told me how to fix it.. and fount the problem.. vac got unplugged off the air control valve vacuum control solenoind valve... probably when i lowered the engine maybe
Thanks again chris!!!!
i now have the whole service manual... i have the whole fuel and imessions section printed off... over 100 pages.... if anyone needs it i got it!
i got the exact code P0411 and i follewed the table... told me how to fix it.. and fount the problem.. vac got unplugged off the air control valve vacuum control solenoind valve... probably when i lowered the engine maybe
Thanks again chris!!!!
i now have the whole service manual... i have the whole fuel and imessions section printed off... over 100 pages.... if anyone needs it i got it!
Thread
Thread Starter
Forum
Replies
Last Post
9000+
Australia & New Zealand S2000 Owners
12
07-27-2005 09:30 PM
Andre
S2000 Under The Hood
5
12-16-2002 05:59 AM