Help me identify my rear subframe...
#1
Help me identify my rear subframe...
Hey all. Last year I purchased my 2001 ap1 used. The previous owner stated that he had swapped out the original ap1 rear subframe for an AP2 CR subframe. I took his word but never confirmed this...He informed me that he did NOT change out the rear upper arms for AP2, so i purchased them on my own. Well today I started swapping them out, only to find out the AP2 arms I bought are too large to fit. Im Just wondering if there is a part number I somewhere on my subframe that i can reference or look up, or if the previous owner was full of shit. Any help is appreciated!!!
#3
if AP2 arms are too large * the spacing between the bushing mounts increased between ap1 and ap2* then you have an ap1 subframe...
ask me how i know i have an ap2 subframe sitting in my apartment waiting to be installed in a few months when winter is over... i'll look tomorrow morning to see if i can find any numbers on it. i also have ap2 upper arms and can compare to ap1 upper arms for you.. i can take pictures tomorrow of that as well and post them if that helps.
-Steve
ask me how i know i have an ap2 subframe sitting in my apartment waiting to be installed in a few months when winter is over... i'll look tomorrow morning to see if i can find any numbers on it. i also have ap2 upper arms and can compare to ap1 upper arms for you.. i can take pictures tomorrow of that as well and post them if that helps.
-Steve
Thread
Thread Starter
Forum
Replies
Last Post
Orpheus
S2000 Under The Hood
2
04-05-2009 12:28 PM