S2KI Honda S2000 Forums - Custom Numbered Door Sill Inserts

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)

- S2000 CR Club Racer Edition (https://www.s2ki.com/forums/s2000-cr-club-racer-edition-279/)

- - Custom Numbered Door Sill Inserts - Place your order now (https://www.s2ki.com/forums/s2000-cr-club-racer-edition-279/custom-numbered-door-sill-inserts-place-your-order-now-1093115/)

FurY, try contacting Haroon either by pm or his email. I don't know that he's on here that often.

Quote:

Originally Posted by FurY

Hi Haroon... I don't think mmoore9700 and I ever heard anything back... do you have any idea when the next batch of orders will be shipping? Thanks!

He pm'd me over the weekend and said he was going to ship mine out on Monday. Then on Monday he sent me a tracking # so mine are on the way.

He said he was delayed due to the holidays, I am sure you will here from him soon.

Quote:

Originally Posted by FurY (Post 23469325)

Quote:

Originally Posted by FurY' timestamp='1420038064' post='23452116

[quote name='mmoore9700' timestamp='1419939238' post='23450941']
Any update on when the next batch will be made and sent out?

Yes please, also curious, thanks :)

Hi Haroon... I don't think mmoore9700 and I ever heard anything back... do you have any idea when the next batch of orders will be shipping? Thanks!
[/quote]

Hi FurY

I am still taking individual orders

Your badges were shipped earlier this week and should be arriving anytime now.

Please PM if they dont arrive by the middle of next week.

https://www.s2ki.com/s2000/public/st...t/thumbsup.gif

Quote:

Originally Posted by The Loon (Post 23471761)

Quote:

Originally Posted by FurY' timestamp='1421346337' post='23469325

[quote name='FurY' timestamp='1420038064' post='23452116']
[quote name='mmoore9700' timestamp='1419939238' post='23450941']
Any update on when the next batch will be made and sent out?

Yes please, also curious, thanks :)

Any install pics yet?

I clear coated mine today. Put about 4 very heavy coats of crystal clear enamel (rustolium). Prepped with Windex. It removed some of the silver. I think it might be sharpie marker.

That's a shame. :eek:

Just be careful when degeasing/prepping for clear coat. I was able to go back over the silver areas with a fine silver sharpie. Then I sprayed a very light coated of clear to seal the colors, before applying the heavy coats of clear.

I will follow your advice jetguy.................... I haven't cleared mine yet, was that the only area on the plaques that you had an issue with?

That was the first to show up. I was more cautious once I saw the silver wipe off.
If you guys have Facebook, I have posted my pics of the install on s2k talk & tech . Not sure how to post pics on here from my phone.

That looks fantastic ! :thumbup: :thumbup: :thumbup:

Ugh I need to stop being lazy and install mine!

They look really good. I mocked mine up in my car and really liked them. They are clean and subtle, but also draw your eye in towards them.

jetguy

I really like your CF door sills too.
Where did you get those from?

Quote:

Originally Posted by jvf1

jetguy I really like your CF door sills too. Where did you get those from?

I also like where you chose to install your small plaque on the dash. I haven't decided where I will put mine yet.

Thanks guys! I still Need to figure out where to put the last little plaque. I made the cf sill myself. It is just shinny 3m di-noc (ahhh don't tell anyone) my sills were pretty scuffed up and I think the cf look really adds to the exotic look!

Quote:

Originally Posted by jetguy

Wow. They turned out great. Good job!
I really like the look especially with the new CF sill plates. Perfect combo.

Quote:

Originally Posted by jetguy (Post 23492760)

https://www.s2ki.com/s2000/uploads/g...29_1236645.jpg

Looks good! It really stands out!! Can't wait to install mines. Old news and I should've saved the thread a while back, where did you get the customize embroided CR production number armest/console?

Thanks!

If you like the Custom CR armrest, contact JPM Coachworks in Smyrna, Georgia.
They did mine too, and a matching Alcantara shift boot.

Yeah, JPM. Does great work and a really nice car enthusiast.

Quote:

Originally Posted by jetguy (Post 23492760)

https://www.s2ki.com/s2000/uploads/g...29_1236645.jpg

Wow, that's amazing. https://www.s2ki.com/s2000/public/st...t/thumbsup.gif

I just wanted to take a moment and publicly thank Haroon for providing this service to us. I know I had expressed interest in a badge a while back and others had too... it was difficult to find someone who could help us with this task and Haroon did a great job stepping up to the plate. Thank you to Adam and others who worked with Haroon to set this up also.

I finally got my badge yesterday after my first one went missing due to no fault of Haroon's. He was quick to help me out and take care of me which I greatly appreciate. He is definitely a valued asset to the S2000 community :thumbup: Thanks again to Haroon and everyone else who helped with this!

+1 here for Haroon, and his making these fantastic plaques available to the CR community. :thumbup: :thumbup: :thumbup:

Is there a trick to taking out the original plate?

jetguy, that's a great looking interior. Your CF treatments look very clean, and I love the CF Batsymbol.

I stuck one of my small badges on the radio door. Your photo makes me wish I had procrastinated, as I usually do.

https://i1052.photobucket.com/albums...psftpzv3cd.jpg

Loon did a great job on these. I decided not to purchase after some considerable thought. After seeing them installed I just wasn't digging the look. Nothing wrong just me being picky. I'm glad everyone is enjoying them.

Quote:

Originally Posted by s2k4life_az (Post 23526881)

Truthfully I'm struggling on where to put the badge and still have it look clean/original/OEM. The interior on these cars is already so clean and simplistic that I feel like every place I consider it looks slapped on. I absolutely love the badge though and didn't want to miss the opportunity to have one. I'll find a place I'm good with soon... right now just under the latch on the glovebox, centered is still leading for me.

Quote:

Originally Posted by FurY (Post 23527983)

I like under the glovebox latch as well! Currently deciding between there, or underneath the wind deflector which has a nice bit of plastic the exact same height as the badge itself :)

Quote:

Originally Posted by Driv300mph (Post 23540198)

Quote:

Originally Posted by FurY' timestamp='1425518511' post='23527983

I like under the glovebox latch as well! Currently deciding between there, or underneath the wind deflector which has a nice bit of plastic the exact same height as the badge itself :)

That's so funny... I just now saw your post and decided to take test fit shots of that location and then thought I was on to something with the windscreen, but you thought of it also lol. Here are the photos... I like the glovebox location, my only issue is that there is a slight curvature to it so the ends of the badge do not sit flush with it and I don't want to bend it. I think the windscreen location may actually be the winner for me, but I still have time to decide because I need to clear it first, get adhesive backing, etc.

https://i1319.photobucket.com/albums...pshvpiv4pa.jpg

https://i1319.photobucket.com/albums...psjwaszobn.jpg

I like the windshield location.

Quote:

Originally Posted by s2k4life_az

I like the windshield location.

Yeah..looks like least obtrusive location.

I also like the windscreen placement the best.

How are guys getting your door cill plates off? Just prying them off? I am nervous about breaking or bending them.

Has anyone put clear bra or clear coat on theirs yet? I don't see mine staying as nice as they are now with all the action my car sees.

Quote:

Originally Posted by jetguy (Post 23491319)

I clear coated mine today. Put about 4 very heavy coats of crystal clear enamel (rustolium). Prepped with Windex. It removed some of the silver. I think it might be sharpie marker.

Quote:

Originally Posted by odb812 (Post 23544033)

Has anyone put clear bra or clear coat on theirs yet? I don't see mine staying as nice as they are now with all the action my car sees.

odb - see the post I quoted above yours... jetguy did it with rustolium. i'm probably going to forego the windex and just clear, mine's been in an envelope

Quote:

Originally Posted by mmoore9700 (Post 23543870)

I also like the windscreen placement the best.

How are guys getting your door cill plates off? Just prying them off? I am nervous about breaking or bending them.

I had a tough time getting those off. Supposedly the pop rivets are removable & reusable, but either it's really tough to do or I just wasn't using the right technique. Since I couldn't get the rivets back on, I simply cleaned the backside of the silver plate with alcohol and used DAP Blue putty to make them stick. Worked great, although something with a little more adhesiveness might have to be used down the road.

Quote:

Originally Posted by FurY (Post 23544212)

odb - see the post I quoted above yours... jetguy did it with rustolium. i'm probably going to forego the windex and just clear, mine's been in an envelope

Thanks! His look nice. I think I'll try the same as you, clear but no windex.

Anyone have any more install pictures for placement ideas for the small plate. I'm still trying to decide where to put mine.

I had a member message me to inquire as to whether the badges and cill plates are still available to order. I can still make them.

I am open to suggestions with regards to redesigning the interior badge to another size/shape so that it will look more factory fit when installed.

Quote:

Originally Posted by The Loon

I had a member message me to inquire as to whether the badges and cill plates are still available to order. I can still make them. I am open to suggestions with regards to redesigning the interior badge to another size/shape so that it will look more factory fit when installed.

I like this one. If you can make or update with this OEM design I would definitely buy a set.

[attachment=78523::]

Quote:

Originally Posted by s2k4life_az (Post 23601420)

Quote:

Originally Posted by The Loon

I had a member message me to inquire as to whether the badges and cill plates are still available to order. I can still make them. I am open to suggestions with regards to redesigning the interior badge to another size/shape so that it will look more factory fit when installed.

I like this one. If you can make or update with this OEM design I would definitely buy a set.

[attachment=78523::]

I too love the look of this one Sandeep! Looks like a true production# plate

Quote:

Originally Posted by s2k4life_az (Post 23601420)

Quote:

Originally Posted by The Loon

I had a member message me to inquire as to whether the badges and cill plates are still available to order. I can still make them. I am open to suggestions with regards to redesigning the interior badge to another size/shape so that it will look more factory fit when installed.

I like this one. If you can make or update with this OEM design I would definitely buy a set.

[attachment=78523::]

I can make that. Not a problem. Please PM if you want to start the ball rolling on this design.

Still available ???
Interested.

Emil, pm The Loon and see if he can make an order for you.

R these still available

Quote:

Originally Posted by adrs2k (Post 23256505)

Hello fellow CR owners. The idea of having a custom/unique identifier (plate/plaque) for our beloved CR's has come up multiple times on these forums over the years. We usually are able to drum up interest, and have had some good discussions about what we all would want. Ultimately we have never been able to make progress and get anything made. We usually fall short when it comes to finding a vendor or person that has the ability to take on the custom project.

Here is a past thread about some ideas we all had: https://www.s2ki.com/s2000/topic/987...es-for-in-car/

The other day I saw a post that was made by a UK member about custom carbon fiber door sill inlays that he created for the 15th Anniversary of the S2000...which got me thinking these would be PERFECT for the CR. The UK member has agreed to help us out and create custom CR door sill inlays.

This thread is absolutely not a FOR SALE THREAD. This is also not for a business or for profit, just a couple S2000 owners trying to help each other out. I spoke with Mocky and cleared this post and its intent with him.

="4"%Ordering details.

="4"%Paypal - haroon_sarwar@yahoo.com
- ="4"%Make payment in British pound (GBP). Cost - £140 ($221.99) for a PAIR of sill plates shipped, and £39 ($61.84) for one interior badge shipped, or both for £170 ($269.56) shipped (based off current exchange rate)
  - ="4"%When you order please include the following details:
    - ="4"%Full name and shipping address
      - ="4"%S2ki screen name
        ="4"%Your CR production number (ex 163)
        ="4"%Door Sill, Interior Badge, or both
        ="4"%Which design you want for the Door Sill and or Interior badge (designs are numbered 1-4)

https://farm8.staticflickr.com/7528/...ccdf6fe7_o.jpg Sill Plate and small badge for order by Adrs2k, on Flickr

Details about the product.

Paypal - haroon_sarwar@yahoo.com
Make payment in British pound (GBP).Cost - £140 ($221.99) for a PAIR of sill plates shipped, and £39 ($61.84) for one interior badge shipped, or both for £170 ($269.56) shipped (based off current exchange rate)
Hand made and completely custom
It is an insert that replaces the factory insert on the door sill - factory insert needs to be removed (very easy to do)
These inserts can be used elsewhere on the car like the engine bay (radiator support) or in the trunk. They are also collectibles/keepsakes
The final design will be dictated by a majority ruling!
The design will incorporate all Honda S2000 Official Fonts and CR Fonts
Design will have Shigeru Uehara's signature
Design will have yellow that matches (as close as possible) to the CR interior yellow
Design will have each owners build number listed (XXX/699)

If you want to buy new factory oem side sills to modify here are the parts required:
Here are the part numbers and prices for the sills (Garnish as Honda calls them)
84201-S2A-A51ZA 016 001 GARNISH, R. SIDE *NH167L* GRAPHITE BLACK 197.27 138.09
84251-S2A-J00ZE 018 001 GARNISH, L. SIDE *NH167L* GRAPHITE BLACK 197.27 138.09
[attachment=63385:FLOOR MAT.jpg]

Here are pictures showing the removal of the factory sill insert.
[attachment=63382:900BE772-06CE-4D5F-B450-8407FFE43573_zpslpdq4xc6.jpg]
[attachment=63383:A9B32A48-A4CF-4AB6-99D4-C4F45B723354_zpsumar6wyq.jpg]
[attachment=63384:746840A5-1873-4041-AFD4-43D912B395B4_zps25rtaoj9.jpg]

Here is what the 15th Anniversary Door Sills look like once installed.
[attachment=63338:ImageUploadedByTapatalk1403996171 .984371.jpg]
[attachment=63339:ImageUploadedByTapatalk1403996192 .033601.jpg]

Here are the pictures of the final designs that are available for purchase.
[attachment=69032:8A3F8E82-55A7-423D-8F69-A04F866805D3_zpswr90tw6v.jpg]
[attachment=69033:74F5D534-7BA2-4EBA-B91D-EA5724C4115D_zpscyyonkmg.jpg]
[attachment=69034:80832B23-92C1-4E71-AE84-C949761CF834_zpspw7kq7z7.jpg]
[attachment=69035:A8EACD14-FE42-4AF4-A3E2-8A6BA25EDCCA_zpsp4uz38yn.jpg]
[attachment=69036:BD355AF9-B4BC-4773-AA56-E7F772B96AD8_zpszzurtexn.jpg]
[attachment=69037:DE551465-6A82-4FE8-B2FD-F767755E81C0_zpsitkk87al.jpg]

Here is the interest list.

1. adrs2k - Adam + 1 small
2. s2k4life_az - Sandeep + 1 small
3. pastoli - Tyler
4. 34WITT- Nathan :D
5. FurY - Jason
6. DaleJH66
7. Dreamer03
8. Kpc06bb (3 Inserts)
9. Goldenfri
10. Mocky
11. Go2
12. SmokingTSX
13. Vanishing Point x4 + 4 small placards as well if available.
14. Mchester x2 +2 small ones
15. Colty09
16. Silver5656 - Frank
17. jvf1 + 2 small placards
18. slo_guy
19. Driv300mph 1 Set door sills + 1 small
20. mmoore9700
21. g.guess88
22. staticzero
23. BSDBC

r these still available