I´ve been searching for an ISO adaptor harness but didn´t find anything, just people that cut and solder.

Found this harness over here but not sure the connector is right? http://www.mytrendyphone.se/shop/iso-adapt...bel-10897p.html

Anyone have a picture of the connector coming from car to HU?

 

what brand HU are you trying to install?

 

Over here all HU´s have ISO connectors but it´s a Sony.

 

Checked out the ebay HU´s and it looks like you don´t have ISO connectors in USA. Nevermind the question then.

 

sorry I couldn't help, i'm not familiar with ISO style harness. in general, in the US you can buy a harness for your car, that you splice to the HU harness out of the car, then just plug the two together in the car (rather than cutting the car's wiring).

 

Ok. Over here all HU´s have ISO connectors and you buy a "car to ISO" harness at your dealer. That way it´s just to plug in without cutting and no need for one Honda to Alpine, one Honda to Sony, etc...
They look like the harness i linked to in first post, just don´t know if that connector is S2K like the text say.

 

This is what the 20-pin connector that goes from the car into the OEM
headunit, at least in the US and I believe worldwide, looks like:

That said, I've often seen stores post the wrong picture of adapter
harnesses, and it's better to go with the description. An S2000 harness
is the same as a '98+ Accord harness, so it's likely that if they are selling
it for that application it's probably correct despite the picture.
A little hard to tell, but to me the picture appears to be a harness for an
earlier Honda (86-98) - my guess is they sell both and put the wrong
picture in. You can probably find others for sale on eBay.