Where is everyone routing the wires from radio to speakers?

I have the radio pulled out and do NOT see a extra piglet of wires

Spod - Mark sent me this.....
Here are the wire codes for your car:
Wiring diagram
The wire bundle is accessible through the driver

 

[quote name='Picturepro' date='Mar 17 2007, 08:26 PM'] I have the radio pulled out and do NOT see a extra piglet of wires

...

The wire bundle is accessible through the driver

 

Well up late last night...
Got the wites through the center console - just took me a while to find the opening
to the center console tunnel.
after folling the stock wire off the radio, there is a piglet of wires behine the AC and temp controls. from the drivers knee pannel I can only see it, cant get a finger near it.
Do I have to remove the dash and Thermostat controls?

someone sent a me the pdf of honda spod instruction.... the line drawing or written instruction say nothing. page 2 shows honda spod wireing route to the area of the radio Nothing more

 

They are sized this way to help prevent mixing up "+" & "-".

Have you refered to the "running the speaker wire" instructions provided with the S-Pod kit? I apologize if they were left out of your package. They are also available on my website.

I'm also available by phone if you would like to call.

Mark

 

Thanks Mark...

The 12ga monster cable Crutchfield sold me was just to F-ing much. A Local shop said no need to use anything more then 16ga, not running 1000w, just a pair of 5.25"
12ga to stock 16-18ga will not look pretty
I'm going to pull out the 12ga wire and let them put in 16ga and make a nice connection to HU and speakers