1052U Ouputs For Nitrous & Water Injection
Thread Starter
Joined: Feb 2008
Posts: 3,964
Likes: 7
From: USA
1052U Ouputs For Nitrous & Water Injection
I have been trying to figure out (2) things and I can't quite find what I am looking for.
(1) Use the EMS as a Nitrous Progressive Controller by using a PWM or Injector output to pulse a standard nitrous solenoid. I would like to set this up with a 2D map based on RPM and Manifold Pressure.
(2) Send a 0-5V signal from the EMS to a devise based on a 2D map based on RPM and Manifold Pressure.
(1) Use the EMS as a Nitrous Progressive Controller by using a PWM or Injector output to pulse a standard nitrous solenoid. I would like to set this up with a 2D map based on RPM and Manifold Pressure.
(2) Send a 0-5V signal from the EMS to a devise based on a 2D map based on RPM and Manifold Pressure.
Thread
Thread Starter
Forum
Replies
Last Post
purekoryo
S2000 Forced Induction
12
Feb 22, 2011 05:11 PM
blondie_s2k
Έλληνες Ιδιοκτήτες S2000 / Greek S2000 Owners
59
Oct 24, 2010 11:01 AM