AEM FIC finally out
Registered User
Joined: Dec 2003
Posts: 397
Likes: 0
From: Schaumburg
Originally Posted by Kyushin,Feb 21 2008, 05:05 PM
I just got all the necessary parts needed to go on with the installation, too bad autowave isnt open on weekends ><
Boomslang harness
Aem FIC 30-1910 with hardware modification to make it compatable with a MY03.
Im just gonna stick to stock injectors for now so i can lean it out down low where its pig rich and richen it up top where it gets lean...
More updates to come!
Boomslang harness
Aem FIC 30-1910 with hardware modification to make it compatable with a MY03.
Im just gonna stick to stock injectors for now so i can lean it out down low where its pig rich and richen it up top where it gets lean...
More updates to come!
Registered User
Joined: Jan 2008
Posts: 6
Likes: 0
From: Butler, PA
I know im a noob here, but i'll be ordering the FIC in a few weeks. i have the vortech kit w/aftercooler, 12lb pulley and will be using 550's. ...right after I get the cometic and arp's in the head.
Joined: Mar 2002
Posts: 588
Likes: 7
From: Bellingham
I've had an F\IC for several weeks now with the boomslang harness for an AP1 and it doesn't work properly. It's the 30-1912 AP1 version. I'm having CAM/TDC sensor issues. Works fine if the CAM1 and CAM2 sensors are not wired through the F\IC but then you don't get full timing control. When hooked up per AEM's S2000 wiring diagram, the ecu is throwing P01366 and P01367 intermittent TDC sensor failure codes and limits rpm to 3000.
Still working on a solution but so far no success.
Still working on a solution but so far no success.
Joined: Apr 2004
Posts: 1,273
Likes: 7
From: tiverton
I cant believe there are still problems with this . I would have thought the unit would have been tested properly before being released ! I am very happy i didnt run out and buy this unit ! Spending all that money for nothing....... It just sucks ! Sorry to all who have purchased this and are now stuck with it ! Aem.... 
shame on you guys !
shame on you guys !
