comptech 7lb pulley diameter
#11
Registered User
Thread Starter
Join Date: Oct 2004
Location: long island, new york
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
the pulley i have is measured at 3.5 and we were told it was a 7lb pulley for the comptech, but, one of our friends is pushing 16lbs on a vortech witht he same size pulley, this is why we are confused
#13
Registered User
Join Date: Jul 2001
Location: Anaheim, Orange County
Posts: 8,754
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeamSiRs2k,Jul 20 2005, 02:07 AM
the pulley i have is measured at 3.5 and we were told it was a 7lb pulley for the comptech, but, one of our friends is pushing 16lbs on a vortech witht he same size pulley, this is why we are confused
#15
Moderator
The pulley in question measures 3.400" OD. It MIGHT be considered a 3.5, not sure. So if it turns out to be a 9psi, which we will use on an aftercooled setup...
The new question is, what more will be needed over the VAFC to safely tune it.
IE:
Regulator (not sure of the Comptech's max capabilites)
Injectors
Add. management (E-manage)
The new question is, what more will be needed over the VAFC to safely tune it.
IE:
Regulator (not sure of the Comptech's max capabilites)
Injectors
Add. management (E-manage)
#16
Others will disagree, but I would ditch the V-AFC and FPR and go at least E-manage and larger injectors. But personally I wouldn't go smaller than a 4" pulley without AEM.
#18
Registered User
Originally Posted by billman250,Jul 20 2005, 09:16 PM
Anybody looking for a 9psi pulley?
BTW, 3.25" was never calculated by me to be 12#. I believe it was closer to 11-11.5. It was always BN's notion that he wanted 12#. Personally, I think the 3.25" pulley will serve both of us very nicely.
#20
Registered User
Originally Posted by TeamSiRs2k,Jul 21 2005, 06:35 AM
i think bill will be very interested in that 7lb pulley, so the 7lb pulley you have measures 4 inches???
Thread
Thread Starter
Forum
Replies
Last Post
Honda-S2000VTec
S2000 Talk
15
03-31-2004 10:45 PM