What started out as a planned "simple" t28 GT2871 setup with 350whp in mind turned into a custom setup based on a GT30 with about 400-450whp in mind. The result of many conversations with Tony from T1 Race Development.... thanks Tony (I think )!

Anyway, here's the car as it sat last year...





And how it sits now...



And here's some of the goods that came from T1...













Flange and some expensive ass clamps...



Walbro 255 and Omni 4 bar map sensor...



Tial 44mm gate with 10psi spring...





Bosch / T1 / Injector Dynamics 1000cc's (didn't end up using the adapters)



Here's a jig I made to make a collector...

 

Some tubing for the mani...



After some frustration and wasting some expensive tubing my friend Fathouse recommended using PVC to practice. $.50/ft vs. $16/ft.... Thanks house!



20 degree cut on the left, 15 degree on the right...



15 degree, what I ended up using...



2nd times a charm...



Ghetto backpurge...













This part was a pain!



Done!

 

Well after some frustration and serious doubt I finally got the first runner done. I think my collector is a little long but looks like I'm going to be able to make it work.



















The rest of the runners should go smoothly but I suspect 'pain in the asses' part 1 and 2 will be wastegate placement and the downpipe build. Stay tuned...

 

awsome! saw it over on H-T!

 

wow, keep it coming

 

Very nice

 

Impressive, good luck on the build

 

Thanks guys!


Should have some updates in the next couple days.

 

very nice, keep us posted

 

looks food, keep up the good work