I recently got tuned @8.7psi Exactly Made 368hp 240tq

Mods are

Pfab log

60-1 Garrett

Flashpro

....read me sign

I want to turn it up a little more since I purchased a new map sensor ~15psi and getting tuned of course!

 

Corrected numbers or uncorrected?

 

Thats good power for a 60-1! Whats size is the hot side?

 

That log manifold is going to choke it up some so probably in the 450 whp range but more likely around 430 whp.

 

 

stock hg?

 

Realistically, at 9 psi you should be making around ~305 whp. At 15 psi that should put you just south of 400 whp. What the dyno reports is anyone's guess and a total crap shoot.

 

^thats waaay off dude. stock ap2's with pfab log and a 60-1 see around 400whp with 10 psi of boost.

dr.jeckyl has the exact same setup(as far as the power creating source) pretty much and made 401whp at 10.

im guessing @15, you'll see about 430-440. after 390-400whp, the log really impedes the flow. so the "hp-per psi" starts dropping off big time. you could up it to like 20 psi and only see about 450.