What's the extra kpro connector for? Couldn't find it on their website....

 

its in the dropdowns when u go to purchase a unit... you need it to be able to connect to kpro

 

USB is the only way to communicate with the Hondata products, so an interface module was needed.

Thanks for the interest guys. Ivan told me there was a thread made about the TVII, and I like to get involved, so let me know if anyone has any other questions.

 

welcome JR! i am still curious how to go about and wire a 0-5v sending unit to be displayed thru the ELD input......... maybe you can chime in and fill us all in?

 

A 0-5v sending unit typically has 3 wires. 5v, ground, and output. The output of the sensor goes to the ELD input on the K-Pro ECU, then you setup the ELD input in the sensors section of the TunerView II software with voltage and real world values for the sensor.

 

can we just splice or "T" into say the tps 5v wire to gain a signal reference for the added sending unit?

 

Where you get the 5v reference is up to you, but yes.

 

What if you are using ELD for WB.

I would like to see it installed in S2K. I have one in my civic.

 

Then you're already using the one available input. You can view the wideband data by setting it up the same way.