gusrock77

...i know an AEM EMS, bigger injectors and smaller pulley ...but where can i get the pulley? ..what size injectors? ..do i need a head gasket? ..where to tune? ..im kinda leaning toward Church Automotive cause they are local..

Black Nugget

• AEM EMS with Built-In Uego
• AEM 3.5 Bar Map Sensor
• AEM Fuel Pressure Regulator
• RC Engineering 750CC Injectors
• Smaller Pulley & Belt

Previously FF2Skip & I experimented with a 3.25" Pulley on our Comptech Unit - average psi for that pulley is 12psi. Personally, I would not recommend anyone do this without a head gasket or an excellent tuner as we both have experienced quite a bit of engine damage that we consider a result of this. As well, I say 750cc injectors due to the fact that I had 650cc injectors and almost maxed them out with the 12psi pulley - better to have the extra size than not.

I feel that with 9psi, the items listed above, and tuning by Church's Tuning - you should be fine! However, I assume no responsibility if things don't turn out as planned!


RC Engineering 750cc Injectors, used... $330