No vtec after engine rebuild and turbo install
03-27-2019, 10:15 AM
#1
Registered User
Thread Starter
Join Date: Dec 2018
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
No vtec after engine rebuild and turbo install
Hello everyone. As the title says i rebuilded the engine and installed a custom turbo kit. Oil feed to the turbo comes from oil pressure switch. I have a sandwich plate with oem oil cooler removed! The oil pressure is 2.8 bar at idle and 6.2 stable anywhere above 3500 rpm. Vtec solenoid kicks in i can hear it clicking. I have a storm link ecu. Turbo spools up but the engine does not rev fast. It seems like vtec does not engage. I saw a few similar posts here but none has a solution. Any advice will be welcome.
Thread
Thread Starter
Forum
Replies
Last Post