Possible MAP sensor problem?
Former Moderator
Joined: Mar 2004
Posts: 4,686
Likes: 0
From: Yorba Linda, CA
Originally Posted by TRBOKEV,Sep 17 2008, 01:51 PM
The only reason I haven't gone and got the tune yet is that I was in the process of working a few bugs out on the car Before I went and spent the 400 dollars on the tune.
I just don't see the point in going for a tune and spending the 400 only to go and spend another 400 for a re tune after I fix things...
I have a wideband on my car so I don't see a problem running the stock map for now since I am monitoring AFR's (which are rich)
I just got to figure out this problem before I go and get my tune.. This crap going on with my car isnt normal even with the base map..
I just don't see the point in going for a tune and spending the 400 only to go and spend another 400 for a re tune after I fix things...
I have a wideband on my car so I don't see a problem running the stock map for now since I am monitoring AFR's (which are rich)
I just got to figure out this problem before I go and get my tune.. This crap going on with my car isnt normal even with the base map..
Thread Starter
Registered User
Joined: Jun 2004
Posts: 4,712
Likes: 0
From: Phillips Ranch 909!
Swapped the map with the one from my 97 Acura CL right now...
Car runs good again and the wideband is much more steady. Partial throttle AFR's are back in the 11-12.5 range and WOT is back to 10.5-10.8. Seems like I found the culprit. I will know for sure in the next couple of days.
Got to get my downpipe finished and my tune done now.
Car runs good again and the wideband is much more steady. Partial throttle AFR's are back in the 11-12.5 range and WOT is back to 10.5-10.8. Seems like I found the culprit. I will know for sure in the next couple of days.
Got to get my downpipe finished and my tune done now.
Registered User
Joined: Jun 2008
Posts: 232
Likes: 0
After a suggestion from another member , I am going to try the Omni 4 bar map sensor because it is plug and play, no slicing needed and its factory dimensions mean easy mounting. I am using it with an AEM not sure if you can use it with the ULT.
http://www.omnipowerusa.com/product.asp?P_ID=133
http://www.omnipowerusa.com/product.asp?P_ID=133
Registered User
Joined: Apr 2007
Posts: 512
Likes: 0
From: Huntington Beach, CA
Originally Posted by s2kadl,Sep 18 2008, 01:06 PM
After a suggestion from another member , I am going to try the Omni 4 bar map sensor because it is plug and play, no slicing needed and its factory dimensions mean easy mounting. I am using it with an AEM not sure if you can use it with the ULT.
http://www.omnipowerusa.com/product.asp?P_ID=133
http://www.omnipowerusa.com/product.asp?P_ID=133
Registered User
Joined: Jun 2008
Posts: 232
Likes: 0
If you look further up on the page the map sensors suit the s2000 00-05 which i think is the B series one. The k series one is for the s2000 06+
Applications:
Honda civic 88-00 all models
Honda accord 94-02 all models including V6
Honda CRV 97-01 all models
Honda Del Sol 93-97 all models
Honda Odyssey 95-01 all models
Honda Prelude 92-01 all models
Honda S2000 00-05 all models
Applications:
Honda civic 88-00 all models
Honda accord 94-02 all models including V6
Honda CRV 97-01 all models
Honda Del Sol 93-97 all models
Honda Odyssey 95-01 all models
Honda Prelude 92-01 all models
Honda S2000 00-05 all models
