pt6265 S2000 570whp
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Martinsburg, WV
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
pt6265 S2000 570whp
02' S2k Indy Yellow - 580whp goal
ENGINE
- Stock F20C Bottom End
- F20C Head Milled/Sonic Cleaned New Seals by Justice Racing
- ARP Head Studs
- AP2 Valve Spring Retainers
- Cometic .076" Head Gasket
- Tucked Engine Bay & Custom Brake Lines
- Mishimoto 140* Thermostat
SETUP
- Precision 600 FMIC
- Precision PT6265 .81a/r Billet
- PFabrications ELTM w/ ARP Manifold Studs
- PFabrications 3" Downpipe w/ Integrated WBo2 Bung
- PFabrications Intercooler Piping
- Tial Q 50mm BOV
- Tial 44mm W/G
- Pneumatic push-lok fittings w/ 1/4" air brake line
- Fast-Turbo Vacuum Block
- 4an Stainless Braided lines for Wastegate Boost Reference
- 10an Oil Drain into block girdle
FUEL
- Bosch 1000cc Saturated Injectors
- Walbro 255lph
- Feeding Bosch 044
- Fuel Pump Relay wired to battery
- Aeromotive Compact FPR
- Inline Pro Fuel Rail
- -6an Feed line
DRIVETRAIN
- ACT 6-Puck Sprung
- PuddyMod Stage 3 Rear Diff, Cryo Gears, Bearing Caps etc
OIL DELIVERY
- Fast-Turbo Oil Lines
ENGINE MANAGEMENT
- AEM EMS 1052
- AEM Wideband Gauge
- MAC Series 35 Boost Solenoid
- AutoMeter CF Boost Gauge
- AEM 3.5 Bar MAP
New Precision pt6265 setup
New Setup: 546/336 @ 20psi Vs. Old log setup on 20lbs
Old Setup on 19lbs log mani and 1.15 a/r exhaust side
ENGINE
- Stock F20C Bottom End
- F20C Head Milled/Sonic Cleaned New Seals by Justice Racing
- ARP Head Studs
- AP2 Valve Spring Retainers
- Cometic .076" Head Gasket
- Tucked Engine Bay & Custom Brake Lines
- Mishimoto 140* Thermostat
SETUP
- Precision 600 FMIC
- Precision PT6265 .81a/r Billet
- PFabrications ELTM w/ ARP Manifold Studs
- PFabrications 3" Downpipe w/ Integrated WBo2 Bung
- PFabrications Intercooler Piping
- Tial Q 50mm BOV
- Tial 44mm W/G
- Pneumatic push-lok fittings w/ 1/4" air brake line
- Fast-Turbo Vacuum Block
- 4an Stainless Braided lines for Wastegate Boost Reference
- 10an Oil Drain into block girdle
FUEL
- Bosch 1000cc Saturated Injectors
- Walbro 255lph
- Feeding Bosch 044
- Fuel Pump Relay wired to battery
- Aeromotive Compact FPR
- Inline Pro Fuel Rail
- -6an Feed line
DRIVETRAIN
- ACT 6-Puck Sprung
- PuddyMod Stage 3 Rear Diff, Cryo Gears, Bearing Caps etc
OIL DELIVERY
- Fast-Turbo Oil Lines
ENGINE MANAGEMENT
- AEM EMS 1052
- AEM Wideband Gauge
- MAC Series 35 Boost Solenoid
- AutoMeter CF Boost Gauge
- AEM 3.5 Bar MAP
New Precision pt6265 setup
New Setup: 546/336 @ 20psi Vs. Old log setup on 20lbs
Old Setup on 19lbs log mani and 1.15 a/r exhaust side
#2
Registered User
Thread Starter
Join Date: Oct 2005
Location: Martinsburg, WV
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Today, while doing a power steering hose recall :hammer: at work, i got called to the cashiers office, thinking i missed a punch time for warranty work, come to find out i received a package..
yes, before you ask, i am a blu-ray whore, and i love playing rock band
only hand tightened bolts to clock the turbo for oil drain angle. will have to remove anyway to fit in downpipe im pretty sure..
#3
Registered User
Thread Starter
Join Date: Oct 2005
Location: Martinsburg, WV
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
since im just a picture whore..
ive been out of work for the past week and starting another week now. i had nasal reconstruction and tonsils and adnoids taken out. fun fun.. this has put a substantial hold on the progress of the car that has been performed over the past 2 months. sucks oh well. i go back to work this monday , so lets hope for alot of cars to work on!
this past weeked i dragged my self out of the house and went to lowes to pick up some bolts for the the oil drain and return flanges as well as the turbine flange. just need to trim the oil drain and attach the an fitting and oil supply will be completed.
ive been contemplating what to buy next. either fuel setup or downpipe..either which i need but im leaning towards the pump/injector setup now.. any of you guys have experience with the aem injector driver?
ive been out of work for the past week and starting another week now. i had nasal reconstruction and tonsils and adnoids taken out. fun fun.. this has put a substantial hold on the progress of the car that has been performed over the past 2 months. sucks oh well. i go back to work this monday , so lets hope for alot of cars to work on!
this past weeked i dragged my self out of the house and went to lowes to pick up some bolts for the the oil drain and return flanges as well as the turbine flange. just need to trim the oil drain and attach the an fitting and oil supply will be completed.
ive been contemplating what to buy next. either fuel setup or downpipe..either which i need but im leaning towards the pump/injector setup now.. any of you guys have experience with the aem injector driver?
#6
Registered User
Thread Starter
Join Date: Oct 2005
Location: Martinsburg, WV
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
i am very please with Pang and his work. very friendly and we have spoken multiple times and responds to emails in minutes. he might just be some super human.. lol
Trending Topics
#9
#10
Registered User
Thread Starter
Join Date: Oct 2005
Location: Martinsburg, WV
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nightcrawler7188,Oct 8 2008, 06:21 AM
which acura do you work at? we have a local mid-atlantic forum you should check out and get to know the local people.
btw you take awesome pics
btw you take awesome pics
im a picture whore buddy, you will always see good pics!
i just went and posted in the mid-atlantic forum, there is actualy things going on around this place eh? lol