What did u use to make the heat shield?

 

Scrap piece of aluminum and my trusty Dremel.

 

How are you going to route the dump tubes for the wastegate?

 

interested in how your gonna route that top dump tube, the bottom on should be easy

 

So ive only been working on the car 1 day a week for a few hours so progress has been slow. I finished up the wastegate lines and mounted the boost solenoid, fabricated my hot side intercooler piping, finished the oil drain and installed the injectors. All thats left is to get some flanges welded on the exhaust pieces and I can start street tuning.

ID1000's (Flipped the harness underneath the manifold for a cleaner look)


Timing cover oil return




Boost solenoid and ss vacuum lines


Intercooler piping fabrication (The couplers are temporary. I made it so it can all be welded up when I get the time)

 

Good progress

 

yes yes i like it a lot, keeping everything stealthy is the key

 

Looks great!

 

really like the wire tuck on the fuel rail, i'm going to do that myself

 

Got the exhaust parts welded and started the car today!

Finished and installed the intercooler piping New flange welded to downpipe Made a turn down