Sideways on the dyno
Thread Starter




Joined: Oct 2000
Posts: 9,033
Likes: 21
From: South of the pier, Huntington Beach, CA
That run was the yellow 996tt Cab with a good 100 horsepower added and running race gas.
Just a friendly pull.

I have a KB Boost a pump I am going to install this week.
Just a friendly pull.

I have a KB Boost a pump I am going to install this week.
Thread Starter




Joined: Oct 2000
Posts: 9,033
Likes: 21
From: South of the pier, Huntington Beach, CA
The exhaust is Asura's 3 inch dual stainless. There is a Vibrant Technologies resonator where the cat goes. The headers are
Hytech supercharger headers.
Originally Posted by blixhavn' timestamp='1433104430' post='23631179
impressive sideways! I wanna see you hit 650 with a charger, that would be awesome!Remember me from 4 years back or so, you took me for a ride while I was at a tournament in HB?
, moved onto building badass cars.Still got the S, got rid of the charger though and got a gt35r. 460 hp on 14psi now... check my build thread in my sig. Also just bought a RA20 celica, so I'm going to build that into my daily driver.
Hope all is well down south with you, loving what you are doing with a charger
.
Thread Starter




Joined: Oct 2000
Posts: 9,033
Likes: 21
From: South of the pier, Huntington Beach, CA

My map sensor is a 3 BAR so must limit boost to less than 29 psi.
Awesome!
Be careful and leave at least a couple psi padding for cooler days, or be sure that your tuner sets up the TPS based fuel map. If you max out the map sensor AEM will automatically switch to that table and if it's not set up then your motor will be toast.
Be careful and leave at least a couple psi padding for cooler days, or be sure that your tuner sets up the TPS based fuel map. If you max out the map sensor AEM will automatically switch to that table and if it's not set up then your motor will be toast.
This thread is sick and I don't know about anyone else, but every time I check in FI and see this thread, I panic thinking someone's car slipped off the dyno...awesome screen name but the thread name could have been better ;-)





