I have seen many examples of supercharged USDM S2000 but no JDM models.

Has anyone SC'ed a JDM S2000 before?

with its slightly higher compression ratio I heard there would be an issue with detonation.

I'm only planning to run stock boost with a vortech sc kit.

Can anyone help me out?

 

PM Bibbs in the UK
He has a full on tuned SC JDM

 

Only issue I've had is with the temps created.

I've put in a Koyo rad and it's helped a lot. I'll be looking into an oil cooler too.

Mase did my AEM tuning and he didn't seem overly worried about the on-road temps. But after a trip to Nurburgring and seeing the car boil, I decided a bit of cooling would be a good idea.

Eventually I'll have :

Koyo Rad (got)
Spoon thermostat (got)
Vented bonnet (got)
Thermostatted oil cooler
FAL rad fans

My setup is a Comptech charger, with charge cooler, running ~316bhp @wheels (9.2 psi).

I've also (via the AEM) set my rad fans to come on nice and early. I've a serial 19in1 gauge for the AEM so monitoring the temps is a lot easier now.