S2000 Forced Induction S2000 Turbocharging and S2000 supercharging, for that extra kick.

Vortech pulley size

Old 10-05-2015 | 12:36 PM
  #1  
manolo1492's Avatar
Thread Starter
 
Joined: Oct 2014
Posts: 241
Likes: 0
Default Vortech pulley size

So I just bought a new V2 SI trim and they sent me a 3.33" pulley from what I can tell. Was that ever a stock pulley size with the Vortech kits??
Old 10-05-2015 | 12:46 PM
  #2  
s2000Junky's Avatar
Community Organizer
15 Year Member
 
Joined: Jun 2007
Posts: 31,059
Likes: 555
Default

Stock, as in base pressure kit? No not at all. Thats full on super boost there. Probably 18psi+
Old 10-06-2015 | 05:00 AM
  #3  
manolo1492's Avatar
Thread Starter
 
Joined: Oct 2014
Posts: 241
Likes: 0
Default

Yes. Was wondering because vortech had said they would include the stock size pulley for the s2000 kit with the new blower. And I didn't think 3.33 was ever stock pulley size for any s2000, so wanted to double check. Maybe they ran out of stock 5" pulleys, which I didn't want anyways. Thanks!
Old 10-06-2015 | 06:23 AM
  #4  
Sideways's Avatar
Registered User
Gold Member (Premium)
20 Year Member
 
Joined: Oct 2000
Posts: 9,030
Likes: 21
From: South of the pier, Huntington Beach, CA
Default

That is a Mustang Pulley if I remember correctly.
Old 10-06-2015 | 06:30 AM
  #5  
manolo1492's Avatar
Thread Starter
 
Joined: Oct 2014
Posts: 241
Likes: 0
Default

Ok thanks, good to know. Maybe they sent me a mustang specific blower, I'll look into that. From what is saw it looked like the original blower, just need to spin the valute to the correct position.
Old 10-06-2015 | 01:16 PM
  #6  
manolo1492's Avatar
Thread Starter
 
Joined: Oct 2014
Posts: 241
Likes: 0
Default

Originally Posted by Sideways
That is a Mustang Pulley if I remember correctly.
I called to verify, they said since they don't make the kit anymore they didn't have the pulley so they installed whatever pulley the was closest match to the stock pulley for the kit. Sounds like a bonus to me!! Although I might not wanna run this on my AP1, I'll prob stick to the 3.4"
Old 10-06-2015 | 07:50 PM
  #7  
Moddiction's Avatar
Former Sponsor
 
Joined: Oct 2007
Posts: 28,698
Likes: 38
From: Mooresville, NC
Default

3.3" would be 18+ psi. 3.6" on my ap1 made about 14.5 psi at 1,000 ft elevation with the regular s trim blower.
Old 10-09-2015 | 08:28 PM
  #8  
Cirq's Avatar
 
Joined: Aug 2012
Posts: 74
Likes: 0
From: Halifax NS
Default

I have a 5.0" pulley on my AP2 vortech V2-SC and I'm making about 5.8psi at 8200 RPM. I've already got a 3.8" on the way... Get something around 4 and you'll probably be happier.
Old 10-10-2015 | 03:15 AM
  #9  
cheddaboy's Avatar
 
Joined: Feb 2009
Posts: 994
Likes: 7
Default

Lol just run the 3.33 with a custom waste gate

https://www.s2ki.com/s2000/topic/926...d/page__st__50
Old 10-13-2015 | 04:07 AM
  #10  
Road racer's Avatar
 
Joined: Sep 2011
Posts: 289
Likes: 16
From: Edmond, OK
Default

I have both a 4.0" and 4.5" pullies for sale in the Forced Induction classifieds section above.

Quick Reply: Vortech pulley size



All times are GMT -8. The time now is 03:51 PM.