Is 315 whp low for a vortech supercharger with upgrades(4 inch aluminium pulley, 650cc rc injectors, diy supra krank vent, berks test pipe with oem exhaust and headers tuned on aem ems.Will a t1r 70mm and js racing headers give me much more whp?And should i be worry about my stock headgasket or get a new hg 3mm?by the way i have 18 inch volks te37 if it has something to do with my whp numbers

thanks in advance

 

how many psi do you produce ?

when i added a js header to my comptech i gained 15whp throughout the power band and mostly low to mid rpm
i have berks test pipe also.

a t1r 70mm will defenately give you some more ponys

 

dont have my aem serial gauge set up yet but my tuner says im about 10-11lbs boost

 

4 inch on a AP1 will get you about 14lbs. I'm running 8lbs at 332 HP. redline set at 8800RPM

 

Can you post the pics of Dyno sheets?
The numbers seem extremely low for that amount of Boost.

 

the numbers are low to very low for that boost

 

I'm at 322whp/211tq(dynojet) 8lbs boost.

 

no dyno sheet i think i have a belt slippage

 

10-11lbs. boost on stock compression? i thought it was recommended to get a slightly thicker headgasket and lower the compression a little bit? any knocking? or is it all cleaned up with retarding via EMS?

 

you can do 10-11lbs on stock compression with a very good tune