got new tires! is it to big?
Originally Posted by S2K 4 ME,Apr 21 2009, 09:56 PM
Behind the rear tires, on the inside, along the seam where the bumper meets the quarter panel, there is a bolt. You need to remove the bolt, and move it back about 1 1/2 inches on the same seam. Drill a hole and put the bolt back in. Then grind down where the bolt was previously. And also trim the bumper. This will give you more clearance.
Do a search on here for bumper bolt relocation, I found it on here a couple years ago when I did mine and the thread had some good pics in it.
Do a search on here for bumper bolt relocation, I found it on here a couple years ago when I did mine and the thread had some good pics in it.
CAMBER you need to adjust it. trust me. I just had to bend my front fender in with a 1/2" ratchet in the middle of the road cause my wheel turned my fender inside out and was cutting through my tire.




