Im thinking of replacing my oem spoiler what spoiler bolt up to the same as the oem spoiler. and pics of them. Thanks

 

gt motoring, yo!

 

Mugen/Mugen Style, and The Raied 04 and up OEM spoiler are the only ones that use the OEM trunk spoiler holes.

The GT Motoring and BYS style spoilers will not cover up that whole...and they mount to the 3rd brake light hole...no OEM spoiler hole

 

whats a Raied 04 and up OEM spoiler

 

The raised version

 

do you have a pic?

 

pica of the spoiler you guys mention please =)

anyone with pictures of the ap2 front lip/mugen hardtop and cr wing all painted white?

 

 

Sorry but that is incorrect information. The holes for the AP1 OEM spoiler and the newer AP2 DO NOT use the same holes. Please don't tell people this because they will end up with extra holes in their trunk if they try to go from the AP2 to the AP1. I did this on my old 04 I had and there are two holes that are more toward the front of the car that need to be filled if you go from the AP2 to AP1 style spoiler.

Also the AP1 spoiler uses bolt holes in the middle too if memory serves me correct so either way you go you end up with holes in the trunk. I could be wrong on this part since it's been about 2 years since I installed it.

 

The op wanted to know what spolier could bolt up to his oem spolier hole. The AP2 uses the same two hole in the back...and two new holes have to be drilled for the front...but you can go from ap1 to ap2 but not the other way around...no one said you could go back?

Also some people only install the ap1 oem spoiler using the two holes on the corners and double sided tape.