245/45-16's non stagger
#3
AP-1, Track days, not sure how the BFG's would do at AX but I will probably try them later.
So running 245's all the way around on 16's is better than I expected by using bored AP-1 rear wheels. Have you tried using spacers to clear the front hubs vs. bored wheels?
Thanks
So running 245's all the way around on 16's is better than I expected by using bored AP-1 rear wheels. Have you tried using spacers to clear the front hubs vs. bored wheels?
Thanks
#4
I ran stock class autocross, so I had to squeeze 245s on the 6.5" wheels up front. The only issue I had was rubbing on the outside clips for the fender liner. I had to replace them a few times.
Thread
Thread Starter
Forum
Replies
Last Post